Hi All,
This patchset adds all building blocks needed for checking the 'Function'
button state in the boot script on Amlogic A311D based VIM3 board. This
button is connected to the ADC lines of the SoC, so it required to enable
meson SARADC, the clocks needed for it and a simple button-adc drivers.
Once applied, one can use following commands in the boot scripts:
-->8---
echo Checking Func button state: \\c
if button Function
then
echo Selected alternative boot
...
fi
--->8---
Best regards
Marek Szyprowski
Samsung R&D Institute Poland
Changelog:
v4:
- rebased onto uboot-amlogic/u-boot-amlogic-next and dropped merged patches
- added adc-keys bindings docs (copied from Linux kernel)
- minor code adjustments pointed by Simon
- enabled driver also in khadas-vim3l_defconfig
v3: https://lists.denx.de/pipermail/u-boot/2020-December/435072.html
- removed 'button' env variable
- extended kconfig and patch descriptions
v2: https://lists.denx.de/pipermail/u-boot/2020-December/434991.html
- removed Change-Id tags
- split defconfig changes into ADC and button related
v1: https://lists.denx.de/pipermail/u-boot/2020-December/434875.html
- initial submission
Patch summary:
Marek Szyprowski (3):
dt-bindings: input: adc-keys bindings documentation
button: add a simple Analog to Digital Converter device based button
driver
configs: khadas-vim3(l): enable Function button support
configs/khadas-vim3_defconfig | 2 +
configs/khadas-vim3l_defconfig | 2 +
doc/device-tree-bindings/input/adc-keys.txt | 49 ++++++++
drivers/button/Kconfig | 8 ++
drivers/button/Makefile | 1 +
drivers/button/button-adc.c | 121 ++++++++++++++++++++
6 files changed, 183 insertions(+)
create mode 100644 doc/device-tree-bindings/input/adc-keys.txt
create mode 100644 drivers/button/button-adc.c
--
2.17.1
