On Tue, Dec 8, 2020 at 2:42 PM Patrick DELAUNAY <patrick.delau...@foss.st.com> wrote: > > Hi, > > it seems that the GPT partitionning is not regonized in SPL in part.c; > > see the trace: > > ## Unknown partition table type 0 > > But you have correclty activate the GPT support in SPL > > CONFIG_SPL_EFI_PARTITION=y > > So I uspect read error in sdmmc driver > > and no HW isue as ROM code load the SPL, but only 1 wire is used i this case > > you can check the SPL device tree / try to reduce the SD card support to > 1 wire and 25MHz. > > And activated trace in SDMMC driver / dump the data readen (for the GPT > header)
Yeah, I missed the u-boot,dm-pre-reloc in one of the pins in sdmmc1_b4_pins_a. Able to boot now. Thanks for the response. Jagan.
