i.MX8M series includes support for high speed modes in uSDHC controllers. Turn on corresponding configuration options for EVK boards, which would enable high speed modes to be included in U-Boot.
Signed-off-by: Andrey Zhizhikin <andrey.zhizhi...@leica-geosystems.com> --- configs/imx8mm_evk_defconfig | 4 ++++ configs/imx8mn_ddr4_evk_defconfig | 4 ++++ configs/imx8mp_evk_defconfig | 3 +++ 3 files changed, 11 insertions(+) diff --git a/configs/imx8mm_evk_defconfig b/configs/imx8mm_evk_defconfig index 91d3bc3ac9..1aef1ab40d 100644 --- a/configs/imx8mm_evk_defconfig +++ b/configs/imx8mm_evk_defconfig @@ -66,6 +66,10 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_MXC=y CONFIG_DM_MMC=y CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y CONFIG_FSL_ESDHC_IMX=y CONFIG_PHYLIB=y CONFIG_PHY_ATHEROS=y diff --git a/configs/imx8mn_ddr4_evk_defconfig b/configs/imx8mn_ddr4_evk_defconfig index 22e5f5aeea..41889c4624 100644 --- a/configs/imx8mn_ddr4_evk_defconfig +++ b/configs/imx8mn_ddr4_evk_defconfig @@ -65,6 +65,10 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_MXC=y CONFIG_DM_MMC=y CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y CONFIG_FSL_ESDHC_IMX=y CONFIG_PHYLIB=y CONFIG_DM_ETH=y diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig index cd5724e811..f84696f030 100644 --- a/configs/imx8mp_evk_defconfig +++ b/configs/imx8mp_evk_defconfig @@ -70,6 +70,9 @@ CONFIG_LED_GPIO=y CONFIG_DM_MMC=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y CONFIG_FSL_ESDHC_IMX=y CONFIG_PHYLIB=y CONFIG_DM_ETH=y -- 2.17.1
