[PATCH v2 31/34] ARM: dts: sama7g5ek: add i2c1 bus and eeproms

[Eugen Hristev]

Add node for flx1 i2c1 subnode (and alias to bus 0)
This bus has two eeprom devices connected.

Signed-off-by: Eugen Hristev <eugen.hris...@microchip.com>
---
 arch/arm/dts/sama7g5ek.dts | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/dts/sama7g5ek.dts b/arch/arm/dts/sama7g5ek.dts
index 452bf425df..b7c35559fe 100644
--- a/arch/arm/dts/sama7g5ek.dts
+++ b/arch/arm/dts/sama7g5ek.dts
@@ -17,6 +17,7 @@
 
        aliases {
                serial0 = &uart0;
+               i2c0 = &i2c1;
        };
 
        chosen {
@@ -62,6 +63,29 @@
        };
 };
 
+&flx1 {
+       atmel,flexcom-mode = <3>;
+       status = "okay";
+};
+
+&i2c1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_flx1_default>;
+       status = "okay";
+
+       eeprom@52 {
+               compatible = "microchip,24aa02e48";
+               reg = <0x52>;
+               pagesize = <16>;
+       };
+
+       eeprom@53 {
+               compatible = "microchip,24aa02e48";
+               reg = <0x53>;
+               pagesize = <16>;
+       };
+};
+
 &gmac0 {
        #address-cells = <1>;
        #size-cells = <0>;
@@ -89,6 +113,12 @@
 };
 
 &pinctrl {
+       pinctrl_flx1_default: flx1_default {
+               pinmux = <PIN_PC9__FLEXCOM1_IO0>,
+                        <PIN_PC10__FLEXCOM1_IO1>;
+               bias-disable;
+       };
+
        pinctrl_flx3_default: flx3_default {
                pinmux = <PIN_PD16__FLEXCOM3_IO0>,
                         <PIN_PD17__FLEXCOM3_IO1>;
-- 
2.25.1