Le 04/10/2010 08:08, Heiko Schocher a écrit : > Hello Albert, > > Albert ARIBAUD wrote: >> Le 03/10/2010 20:03, Wolfgang Denk a écrit : >> >>> Dear Reinhard Meyer, >>> >>> In message<4ca6e8e5.2090...@emk-elektronik.de> you wrote: >>>>> And yes, this means the content arrays of pointers such as init_sequence >>>>> is not relocated. Been there, done that, can give you one of the >>>>> tee-shirts I got :) >>> It should work. >>> >>> Eventually we need to find out which sort of tweaking of compiler >>> and/or linker options is needed on ARM. >> >> While looking for enhancements to Heiko's arm relocation patches, I have >> gone through all relocation related compiler and linker options, and >> then some. -fPIC / -fPIE will not generate GOT fixups for data >> containing pointers, and I have found no additional option that will. > > Yep, that was also my problem ... > >> OTOH, -pie will generate this kind of fixup (and all others needed) in >> the form of .rel.dyn relocations, as Bill describes. > > Ah! Have to look in this, maybe thats the way we have to go ...
Right now I can build (not run, mind you) u-boot for edminiv2 without -fPIC/-fPIE, with -pie and a modified u-boot.lds and start.S. Almost all of the .rel.dyn fixup entries are type 23, that is, relative to the base address, which is good. However, here are about ten at the end which are type 2 -- symbol-relative -- and I am studying them in order to see if they are needed. If type 23 relocations are all that is needed, then a first ARM ELF relocation implementation should 'simply' trade GOT vs .rel.dyn relocation in start.S (I am almost there) and remove fixups in board_init_r. Start.S would apply type 23 fixups only and ignore the rest. Later on we could add a build stage to rewrite the .rel.dyn section as suggested, by filtering out non-type-23 relocs and keeping only the address part of type-23 ones, reducing the .rel.dyn table roughly by half. The good news is, I can spare a couple more hours today on this. I'll let you all know how this fares! > bye, > Heiko Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
