Forgot to add "Reviewed-by: Simon Glass <s...@chromium.org>" tag, will resend
this patch.
>-----Original Message-----
>From: Pragnesh Patel <pragnesh.pa...@openfive.com>
>Sent: 03 December 2020 10:21
>To: u-boot@lists.denx.de
>Cc: atish.pa...@wdc.com; palmerdabb...@google.com; bmeng...@gmail.com;
>Paul Walmsley ( Sifive) <paul.walms...@sifive.com>; anup.pa...@wdc.com;
>Sagar Kadam <sagar.ka...@openfive.com>; r...@andestech.com; Pragnesh
>Patel <pragnesh.pa...@openfive.com>; Simon Glass <s...@chromium.org>; Naoki
>Hayama <naoki.hay...@lineo.co.jp>; Marek Vasut
><marek.vasut+rene...@gmail.com>; Patrick Delaunay
><patrick.delau...@st.com>; Adam Ford <aford...@gmail.com>; Thomas Hebb
><tommyh...@gmail.com>; Ramon Fried <rfried....@gmail.com>; Heinrich
>Schuchardt <xypron.g...@gmx.de>; Bin Meng <bin.m...@windriver.com>; Sam
>Protsenko <joe.s...@gmail.com>; Miquel Raynal <miquel.ray...@bootlin.com>;
>Philippe Reynes <philippe.rey...@softathome.com>; Frédéric Danis
><frederic.da...@collabora.com>; Patrice Chotard <patrice.chot...@st.com>;
>Baruch Siach <bar...@tkos.co.il>
>Subject: [PATCH v3] cmd: Add a pwm command
>
>Add the command "pwm" for controlling the pwm channels. This command
>provides pwm invert/config/enable/disable functionalities via PWM uclass
>drivers
>
>Signed-off-by: Pragnesh Patel <pragnesh.pa...@sifive.com>
>---
>
>Changes in v3:
>- Replace goto with return
>- Print return value for error
>- Change the assert condition for success
>
>Changes in v2:
>- Add test for pwm command
>
> README | 1 +
> cmd/Kconfig | 6 ++
> cmd/Makefile | 1 +
> cmd/pwm.c | 117 ++++++++++++++++++++++++++++++++++++++
> configs/sandbox_defconfig | 1 +
> test/cmd/Makefile | 1 +
> test/cmd/pwm.c | 47 +++++++++++++++
> 7 files changed, 174 insertions(+)
> create mode 100644 cmd/pwm.c
> create mode 100644 test/cmd/pwm.c
>
>diff --git a/README b/README
>index cb49aa15da..dab291e0d0 100644
>--- a/README
>+++ b/README
>@@ -3160,6 +3160,7 @@ i2c - I2C sub-system
> sspi - SPI utility commands
> base - print or set address offset
> printenv- print environment variables
>+pwm - control pwm channels
> setenv - set environment variables
> saveenv - save environment variables to persistent storage protect - enable
> or
>disable FLASH write protection diff --git a/cmd/Kconfig b/cmd/Kconfig index
>1595de999b..0d085108f4 100644
>--- a/cmd/Kconfig
>+++ b/cmd/Kconfig
>@@ -918,6 +918,12 @@ config CMD_GPIO
> help
> GPIO support.
>
>+config CMD_PWM
>+ bool "pwm"
>+ depends on DM_PWM
>+ help
>+ Control PWM channels, this allows invert/config/enable/disable PWM
>channels.
>+
> config CMD_GPT
> bool "GPT (GUID Partition Table) command"
> select EFI_PARTITION
>diff --git a/cmd/Makefile b/cmd/Makefile index dd86675bf2..75df3c136c
>100644
>--- a/cmd/Makefile
>+++ b/cmd/Makefile
>@@ -120,6 +120,7 @@ endif
> obj-$(CONFIG_CMD_PINMUX) += pinmux.o
> obj-$(CONFIG_CMD_PMC) += pmc.o
> obj-$(CONFIG_CMD_PSTORE) += pstore.o
>+obj-$(CONFIG_CMD_PWM) += pwm.o
> obj-$(CONFIG_CMD_PXE) += pxe.o pxe_utils.o
> obj-$(CONFIG_CMD_WOL) += wol.o
> obj-$(CONFIG_CMD_QFW) += qfw.o
>diff --git a/cmd/pwm.c b/cmd/pwm.c
>new file mode 100644
>index 0000000000..5849fc57b6
>--- /dev/null
>+++ b/cmd/pwm.c
>@@ -0,0 +1,117 @@
>+// SPDX-License-Identifier: GPL-2.0+
>+/*
>+ * Control PWM channels
>+ *
>+ * Copyright (c) 2020 SiFive, Inc
>+ * author: Pragnesh Patel <pragnesh.pa...@sifive.com> */
>+
>+#include <command.h>
>+#include <dm.h>
>+#include <pwm.h>
>+
>+enum pwm_cmd {
>+ PWM_SET_INVERT,
>+ PWM_SET_CONFIG,
>+ PWM_SET_ENABLE,
>+ PWM_SET_DISABLE,
>+};
>+
>+static int do_pwm(struct cmd_tbl *cmdtp, int flag, int argc,
>+ char *const argv[])
>+{
>+ const char *str_cmd, *str_channel = NULL, *str_enable = NULL;
>+ const char *str_pwm = NULL, *str_period = NULL, *str_duty = NULL;
>+ enum pwm_cmd sub_cmd;
>+ struct udevice *dev;
>+ u32 channel, pwm_enable, pwm_dev, period_ns = 0, duty_ns = 0;
>+ int ret;
>+
>+ if (argc < 4)
>+ return CMD_RET_USAGE;
>+
>+ str_cmd = argv[1];
>+ argc -= 2;
>+ argv += 2;
>+
>+ if (argc > 0) {
>+ str_pwm = *argv;
>+ argc--;
>+ argv++;
>+ }
>+
>+ if (!str_pwm)
>+ return CMD_RET_USAGE;
>+
>+ switch (*str_cmd) {
>+ case 'i':
>+ sub_cmd = PWM_SET_INVERT;
>+ break;
>+ case 'c':
>+ sub_cmd = PWM_SET_CONFIG;
>+ break;
>+ case 'e':
>+ sub_cmd = PWM_SET_ENABLE;
>+ break;
>+ case 'd':
>+ sub_cmd = PWM_SET_DISABLE;
>+ break;
>+ default:
>+ return CMD_RET_USAGE;
>+ }
>+
>+ pwm_dev = simple_strtoul(str_pwm, NULL, 10);
>+ ret = uclass_get_device(UCLASS_PWM, pwm_dev, &dev);
>+ if (ret) {
>+ printf("pwm: '%s' not found\n", str_pwm);
>+ return cmd_process_error(cmdtp, ret);
>+ }
>+
>+ if (argc > 0) {
>+ str_channel = *argv;
>+ channel = simple_strtoul(str_channel, NULL, 10);
>+ argc--;
>+ argv++;
>+ } else {
>+ return CMD_RET_USAGE;
>+ }
>+
>+ if (sub_cmd == PWM_SET_INVERT && argc > 0) {
>+ str_enable = *argv;
>+ pwm_enable = simple_strtoul(str_enable, NULL, 10);
>+ ret = pwm_set_invert(dev, channel, pwm_enable);
>+ } else if (sub_cmd == PWM_SET_CONFIG && argc == 2) {
>+ str_period = *argv;
>+ argc--;
>+ argv++;
>+ period_ns = simple_strtoul(str_period, NULL, 10);
>+
>+ if (argc > 0) {
>+ str_duty = *argv;
>+ duty_ns = simple_strtoul(str_duty, NULL, 10);
>+ }
>+
>+ ret = pwm_set_config(dev, channel, period_ns, duty_ns);
>+ } else if (sub_cmd == PWM_SET_ENABLE) {
>+ ret = pwm_set_enable(dev, channel, 1);
>+ } else if (sub_cmd == PWM_SET_DISABLE) {
>+ ret = pwm_set_enable(dev, channel, 0);
>+ } else {
>+ printf("PWM arguments missing\n");
>+ return CMD_RET_FAILURE;
>+ }
>+
>+ if (ret) {
>+ printf("error(%d)\n", ret);
>+ return CMD_RET_FAILURE;
>+ }
>+
>+ return CMD_RET_SUCCESS;
>+}
>+
>+U_BOOT_CMD(pwm, 6, 0, do_pwm,
>+ "control pwm channels",
>+ "pwm <invert> <pwm_dev_num> <channel> <polarity>\n"
>+ "pwm <config> <pwm_dev_num> <channel> <period_ns> <duty_ns>\n"
>+ "pwm <enable/disable> <pwm_dev_num> <channel>\n"
>+ "Note: All input values are in decimal");
>diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index
>f2a767a4cd..7a16603461 100644
>--- a/configs/sandbox_defconfig
>+++ b/configs/sandbox_defconfig
>@@ -58,6 +58,7 @@ CONFIG_CMD_LSBLK=y
> CONFIG_CMD_MUX=y
> CONFIG_CMD_OSD=y
> CONFIG_CMD_PCI=y
>+CONFIG_CMD_PWM=y
> CONFIG_CMD_READ=y
> CONFIG_CMD_REMOTEPROC=y
> CONFIG_CMD_SPI=y
>diff --git a/test/cmd/Makefile b/test/cmd/Makefile index
>859dcda239..dde98dd371 100644
>--- a/test/cmd/Makefile
>+++ b/test/cmd/Makefile
>@@ -4,3 +4,4 @@
>
> obj-y += mem.o
> obj-$(CONFIG_CMD_MEM_SEARCH) += mem_search.o
>+obj-$(CONFIG_CMD_PWM) += pwm.o
>diff --git a/test/cmd/pwm.c b/test/cmd/pwm.c new file mode 100644 index
>0000000000..3cc1aaffd4
>--- /dev/null
>+++ b/test/cmd/pwm.c
>@@ -0,0 +1,47 @@
>+// SPDX-License-Identifier: GPL-2.0+
>+/*
>+ * Test for pwm command
>+ *
>+ * Copyright 2020 SiFive, Inc
>+ *
>+ * Authors:
>+ * Pragnesh Patel <pragnesh.pa...@sifive.com>
>+ */
>+
>+#include <dm.h>
>+#include <dm/test.h>
>+#include <test/test.h>
>+#include <test/ut.h>
>+
>+/* Basic test of 'pwm' command */
>+static int dm_test_pwm_cmd(struct unit_test_state *uts) {
>+ struct udevice *dev;
>+
>+ ut_assertok(uclass_get_device(UCLASS_PWM, 0, &dev));
>+ ut_assertnonnull(dev);
>+
>+ ut_assertok(console_record_reset_enable());
>+
>+ /* pwm <invert> <pwm_dev_num> <channel> <polarity> */
>+ run_command("pwm invert 0 0 1", 0);
>+ ut_assert_console_end();
>+
>+ run_command("pwm invert 0 0 0", 0);
>+ ut_assert_console_end();
>+
>+ /* pwm <config> <pwm_dev_num> <channel> <period_ns> <duty_ns> */
>+ run_command("pwm config 0 0 period_ns duty_ns", 0);
>+ ut_assert_console_end();
>+
>+ /* pwm <enable/disable> <pwm_dev_num> <channel> */
>+ run_command("pwm enable 0 0", 0);
>+ ut_assert_console_end();
>+
>+ run_command("pwm disable 0 0", 0);
>+ ut_assert_console_end();
>+
>+ return 0;
>+}
>+
>+DM_TEST(dm_test_pwm_cmd, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT
>|
>+UT_TESTF_CONSOLE_REC);
>--
>2.17.1
