On Fri, Oct 1, 2010 at 10:59 PM, John Tobias <jtob...@viaas.com> wrote: > Hi Steve, > Thanks for the response. The processor is OMAP4 and I am in the last stage > of bringing up the board. I took the source code from the omapzoom git tree. > How do I know if pre or post relocation changes?
If you took the code from the omap4-dev branches of omapzoom then the recent relocation changes are not an issue, since that code is based on a u-boot release from 4 years ago! Given that, folks here on the u-boot list aren't too likely to be the right resource for help on such an old code base. If you want to stick with that code, then TI's E2E site is probably your best bet for support. However, I recommend you switch to mainline u-boot v2010.09, released just this week. I have added support for the OMAP4 Panda and SDP4430, so these should serve as good examples for your board. Steve _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
