Hi Steve, Thanks for the response. The processor is OMAP4 and I am in the last stage of bringing up the board. I took the source code from the omapzoom git tree.
How do I know if pre or post relocation changes? Regards, john On Fri, Oct 1, 2010 at 8:43 PM, Steve Sakoman <sako...@gmail.com> wrote: > On Fri, Oct 1, 2010 at 4:27 PM, John Tobias <jtob...@viaas.com> wrote: > > Hi Guys, > > > > I have a bit problem here and may be you can help some idea to debug > > x-loader (please see the log messages below). I am using a micro-sd card > > with FAT16 partition. I boot my board using the the sd card, the > x-loader > > execute and loads the u-boot.bin at address location 0x80e80000. But, > after > > executing this ((init_fnc_t *)CFG_LOADADDR)(); instead of executing the > > u-boot, it executed the hang function. > > Any clues? > > I think you'll need to give a lot more information if anyone is to be > able to help. > > What type of processor is on the board? I suspect OMAP4 based on the > 0x80e80000 load address. > > What source tree is the x-load built from, and also what version of > u-boot -- particularly whether this is pre or post the relocation > changes. > > It appears that x-load is loading u-boot properly and then something > goes wrong. You'll get the "X-Loader hangs" message if there is ever > a return from the ((init_fnc_t *)CFG_LOADADDR)() function call, so > obviously something goes wrong once the downloaded u-boot starts > executing. > > Steve >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
