Hello Wolfgang, Reinhard, Wolfgang Denk wrote: > Dear Reinhard Meyer, > > In message <4ca5d857.5010...@emk-elektronik.de> you wrote: >> The environment issues still persist. I am at a loss >> there now. >> >> Observation: the old style commands "setenv", "printenv", etc. >> work, but any "env" command except for "env" alone crashes. > > OK. If "printenv" works and "env print" fails then it has nothing to > do with the environment code itself, as both call the same function. > > It must have something to do with the implementation of subcommands > then. See do_env() in "common/cmd_nvedit.c"; check if the command > table address for find_cmd_tbl() is OK. > > Eventually other commands with subcommands fail as well (i2c ?) ?
Yep, I think thats the direction. i2c should work, because the subcommands get fixed in board_init_r() through i2c_reloc() For fixing commandtable (and subcommands) I made a common function fixup_cmdtable() in common/command.c see also commit 620f1f6a64095ed558e68d37f1965d015cd49b02 Note: For powerpc this fixups are not needed, so CONFIG_RELOC_FIXUP_WORKS is defined for powerpc ... don;t sure, how exactly this work on powerpc ... bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
