Hardware testing of a board using the Armada 385 has shown that an
impedance threshold setting of 0x7 performs better in an eye-diagram
test than with Marvell's recommended value 0x6.
As other boards may still perform better with Marvell's reccomended value,
a configuration option is added with a default value of 0x6.
Signed-off-by: Joshua Scott <joshua.sc...@alliedtelesis.co.nz>
Reviewed-by: Stefan Roese <s...@denx.de>
---
Changes for v2:
- Added "range" to Kconfig to prevent invalid values from being
selected.
arch/arm/mach-mvebu/Kconfig | 6 ++++++
arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c | 6 +++---
2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 0d8e0922a2..72aee8b3e5 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -30,6 +30,12 @@ config ARMADA_38X
select ARMADA_32BIT
select HAVE_MVEBU_EFUSE
+config ARMADA_38X_HS_IMPEDANCE_THRESH
+ hex "Armada 38x USB 2.0 High-Speed Impedance Threshold (0x0 - 0x7)"
+ depends on ARMADA_38X
+ default 0x6
+ range 0x0 0x7
+
config ARMADA_XP
bool
select ARMADA_32BIT
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
index 2454730e6d..ae2a361104 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
@@ -677,9 +677,9 @@ struct op_params usb2_power_up_params[] = {
{0xc200c, 0x0 /*NA*/, 0xf000, {0x1000}, 0, 0},
{0xc400c, 0x0 /*NA*/, 0xf000, {0x1000}, 0, 0},
/* Change the High speed impedance threshold */
- {0xc0008, 0x0 /*NA*/, 0x700, {0x600}, 0, 0},
- {0xc2008, 0x0 /*NA*/, 0x700, {0x600}, 0, 0},
- {0xc4008, 0x0 /*NA*/, 0x700, {0x600}, 0, 0},
+ {0xc0008, 0x0 /*NA*/, 0x700, {CONFIG_ARMADA_38X_HS_IMPEDANCE_THRESH <<
8}, 0, 0},
+ {0xc2008, 0x0 /*NA*/, 0x700, {CONFIG_ARMADA_38X_HS_IMPEDANCE_THRESH <<
8}, 0, 0},
+ {0xc4008, 0x0 /*NA*/, 0x700, {CONFIG_ARMADA_38X_HS_IMPEDANCE_THRESH <<
8}, 0, 0},
/* Change the squelch level of the receiver to meet the receiver
electrical measurements (squelch and receiver sensitivity tests) */
{0xc0014, 0x0 /*NA*/, 0xf, {0x8}, 0, 0},
{0xc2014, 0x0 /*NA*/, 0xf, {0x8}, 0, 0},
--
2.29.2
