On Thu, Oct 22, 2020 at 3:23 PM Padmarao Begari
<padmarao.beg...@microchip.com> wrote:
>
> Add device tree for Microchip PolarFire SoC Icicle Kit.
>
> Signed-off-by: Padmarao Begari <padmarao.beg...@microchip.com>
> ---
> arch/riscv/dts/Makefile | 1 +
> arch/riscv/dts/microchip-icicle-kit-a000.dts | 426 +++++++++++++++++++
> 2 files changed, 427 insertions(+)
> create mode 100644 arch/riscv/dts/microchip-icicle-kit-a000.dts
>
> diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile
> index 3a6f96c67d..48c43bd122 100644
> --- a/arch/riscv/dts/Makefile
> +++ b/arch/riscv/dts/Makefile
> @@ -3,6 +3,7 @@
> dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb
> dtb-$(CONFIG_TARGET_SIFIVE_FU540) += hifive-unleashed-a00.dtb
> dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb
> +dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += microchip-icicle-kit-a000.dtb
>
> targets += $(dtb-y)
>
> diff --git a/arch/riscv/dts/microchip-icicle-kit-a000.dts
> b/arch/riscv/dts/microchip-icicle-kit-a000.dts
> new file mode 100644
> index 0000000000..7110d2a78b
> --- /dev/null
> +++ b/arch/riscv/dts/microchip-icicle-kit-a000.dts
> @@ -0,0 +1,426 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/* Copyright (c) 2020 Microchip Technology Inc */
> +
> +/dts-v1/;
> +#include "dt-bindings/clock/microchip,pfsoc-clock.h"
> +
> +/* Clock frequency (in Hz) of the rtcclk */
> +#define RTCCLK_FREQ 1000000
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + model = "Microchip PolarFire-SoC";
> + compatible = "microchip,polarfire-soc";
> +
> + aliases {
> + serial0 = &uart0;
> + ethernet0 = &emac1;
> + };
> +
> + chosen {
> + stdout-path = "serial0";
> + };
> +
> + cpucomplex: cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + timebase-frequency = <RTCCLK_FREQ>;
> + cpu0: cpu@0 {
> + clocks = <&clkcfg CLK_CPU>;
> + compatible = "sifive,e51", "sifive,rocket0", "riscv";
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <128>;
> + i-cache-size = <16384>;
> + reg = <0>;
> + riscv,isa = "rv64imac";
> + status = "disabled";
> + operating-points = <
> + /* kHz uV */
> + 600000 1100000
> + 300000 950000
> + 150000 750000
> + >;
> + cpu0intc: interrupt-controller {
> + #interrupt-cells = <1>;
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + };
> + };
> + cpu1: cpu@1 {
> + clocks = <&clkcfg CLK_CPU>;
> + compatible = "sifive,u54-mc", "sifive,rocket0",
> "riscv";
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <32>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <32>;
> + mmu-type = "riscv,sv39";
> + reg = <1>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> + status = "okay";
> + operating-points = <
> + /* kHz uV */
> + 600000 1100000
> + 300000 950000
> + 150000 750000
> + >;
> + cpu1intc: interrupt-controller {
> + #interrupt-cells = <1>;
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + };
> + };
> + cpu2: cpu@2 {
> + clocks = <&clkcfg CLK_CPU>;
> + compatible = "sifive,u54-mc", "sifive,rocket0",
> "riscv";
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <32>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <32>;
> + mmu-type = "riscv,sv39";
> + reg = <2>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> + status = "okay";
> + operating-points = <
> + /* kHz uV */
> + 600000 1100000
> + 300000 950000
> + 150000 750000
> + >;
> + cpu2intc: interrupt-controller {
> + #interrupt-cells = <1>;
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + };
> + };
> + cpu3: cpu@3 {
> + clocks = <&clkcfg CLK_CPU>;
> + compatible = "sifive,u54-mc", "sifive,rocket0",
> "riscv";
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <32>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <32>;
> + mmu-type = "riscv,sv39";
> + reg = <3>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> + status = "okay";
> + operating-points = <
> + /* kHz uV */
> + 600000 1100000
> + 300000 950000
> + 150000 750000
> + >;
> + cpu3intc: interrupt-controller {
> + #interrupt-cells = <1>;
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + };
> + };
> + cpu4: cpu@4 {
> + clocks = <&clkcfg CLK_CPU>;
> + compatible = "sifive,u54-mc", "sifive,rocket0",
> "riscv";
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <32>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <32>;
> + mmu-type = "riscv,sv39";
> + reg = <4>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> + status = "okay";
> + operating-points = <
> + /* kHz uV */
> + 600000 1100000
> + 300000 950000
> + 150000 750000
> + >;
> + cpu4intc: interrupt-controller {
> + #interrupt-cells = <1>;
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + };
> + };
> + };
> + refclk: refclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <600000000>;
> + clock-output-names = "msspllclk";
> + };
> + ddr: memory@80000000 {
> + device_type = "memory";
> + reg = <0x0 0x80000000 0x0 0x40000000>;
> + clocks = <&clkcfg CLK_DDRC>;
> + };
> + soc: soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "sifive,fu540-c000", "sifive,fu540",
> "simple-bus";
> + ranges;
> + clint0: clint@2000000 {
> + compatible = "riscv,clint0";
> + interrupts-extended = <&cpu0intc 3 &cpu0intc 7
> + &cpu1intc 3 &cpu1intc 7
> + &cpu2intc 3 &cpu2intc 7
> + &cpu3intc 3 &cpu3intc 7
> + &cpu4intc 3 &cpu4intc 7>;
> + reg = <0x0 0x2000000 0x0 0x10000>;
> + reg-names = "control";
> + clock-frequency = <RTCCLK_FREQ>;
> + };
> + cachecontroller: cache-controller@2010000 {
> + compatible = "sifive,fu540-c000-ccache", "cache";
> + cache-block-size = <64>;
> + cache-level = <2>;
> + cache-sets = <1024>;
> + cache-size = <2097152>;
> + cache-unified;
> + interrupt-parent = <&plic>;
> + interrupts = <1 2 3>;
> + reg = <0x0 0x2010000 0x0 0x1000>;
> + };
> + dma: dma@3000000 {
> + compatible = "sifive,fu540-c000-pdma";
> + reg = <0x0 0x3000000 0x0 0x8000>;
> + interrupt-parent = <&plic>;
> + interrupts = <23 24 25 26 27 28 29 30>;
> + #dma-cells = <1>;
> + };
> + plic: interrupt-controller@c000000 {
> + #interrupt-cells = <1>;
> + compatible = "sifive,plic-1.0.0";
> + reg = <0x0 0xc000000 0x0 0x4000000>;
> + riscv,max-priority = <7>;
> + riscv,ndev = <186>;
> + interrupt-controller;
> + interrupts-extended = <
> + &cpu0intc 11
> + &cpu1intc 11 &cpu1intc 9
> + &cpu2intc 11 &cpu2intc 9
> + &cpu3intc 11 &cpu3intc 9
> + &cpu4intc 11 &cpu4intc 9>;
> + };
> + uart0: serial@20000000 {
> + compatible = "ns16550a";
> + reg = <0x0 0x20000000 0x0 0x400>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + interrupt-parent = <&plic>;
> + interrupts = <90>;
> + clock-frequency = <150000000>;
> + clocks = <&clkcfg CLK_MMUART0>;
> + status = "okay";
> + };
> + clkcfg: clkcfg@20002000 {
> + compatible = "microchip,pfsoc-clkcfg";
> + reg = <0x0 0x20002000 0x0 0x1000>;
> + reg-names = "mss_sysreg";
> + clocks = <&refclk>;
> + #clock-cells = <1>;
> + clock-output-names = "cpu", "axi", "ahb", "envm",
> + "mac0", "mac1", "mmc", "timer",
> + "mmuart0", "mmuart1", "mmuart2",
> + "mmuart3", "mmuart4", "spi0", "spi1",
> + "i2c0", "i2c1", "can0", "can1", "usb",
> + "reserved", "rtc", "qspi", "gpio0",
> + "gpio1", "gpio2", "ddrc", "fic0",
> + "fic1", "fic2", "fic3", "athena",
> + "cfm";
> + };
> + emmc: mmc@20008000 {
> + compatible = "cdns,sd4hc";
> + reg = <0x0 0x20008000 0x0 0x1000>;
> + interrupt-parent = <&plic>;
> + interrupts = <88 89>;
> + pinctrl-names = "default";
> + clocks = <&clkcfg CLK_MMC>;
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + mmc-ddr-3_3v;
> + max-frequency = <200000000>;
> + non-removable;
> + no-sd;
> + no-sdio;
> + voltage-ranges = <3300 3300>;
> + status = "okay";
> + };
> + sdcard: sd@20008000 {
Will there be any warning that two nodes have the same reg address?
> + compatible = "cdns,sd4hc";
> + reg = <0x0 0x20008000 0x0 0x1000>;
> + interrupt-parent = <&plic>;
> + interrupts = <88>;
> + pinctrl-names = "default";
> + clocks = <&clkcfg CLK_MMC>;
> + bus-width = <4>;
> + disable-wp;
> + cap-sd-highspeed;
> + card-detect-delay = <200>;
> + sd-uhs-sdr12;
> + sd-uhs-sdr25;
> + sd-uhs-sdr50;
> + sd-uhs-sdr104;
> + max-frequency = <200000000>;
> + status = "disabled";
> + };
> + uart1: serial@20100000 {
> + compatible = "ns16550a";
> + reg = <0x0 0x20100000 0x0 0x400>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + interrupt-parent = <&plic>;
> + interrupts = <91>;
> + clock-frequency = <150000000>;
> + clocks = <&clkcfg CLK_MMUART1>;
> + status = "okay";
> + };
> + uart2: serial@20102000 {
> + compatible = "ns16550a";
> + reg = <0x0 0x20102000 0x0 0x400>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + interrupt-parent = <&plic>;
> + interrupts = <92>;
> + clock-frequency = <150000000>;
> + clocks = <&clkcfg CLK_MMUART2>;
> + status = "okay";
> + };
> + uart3: serial@20104000 {
> + compatible = "ns16550a";
> + reg = <0x0 0x20104000 0x0 0x400>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + interrupt-parent = <&plic>;
> + interrupts = <93>;
> + clock-frequency = <150000000>;
> + clocks = <&clkcfg CLK_MMUART3>;
> + status = "okay";
> + };
> + i2c0: i2c@02010a000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "microsemi,ms-pf-mss-i2c";
> + reg = <0x0 0x2010a000 0x0 0x1000>;
> + interrupt-parent = <&plic>;
> + interrupts = <58>;
> + clocks = <&clkcfg CLK_I2C0>;
> + status = "disabled";
> + };
> + i2c1: i2c@02010b000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "microsemi,ms-pf-mss-i2c";
> + reg = <0x0 0x2010b000 0x0 0x1000>;
> + interrupt-parent = <&plic>;
> + interrupts = <61>;
> + clocks = <&clkcfg CLK_I2C1>;
> + status = "disabled";
> + pac193x@0x10 {
> + compatible = "microchip,pac1934";
> + reg = <0x10>;
> + samp-rate = <64>;
> + status = "disabled";
> + ch1: channel@0 {
> + uohms-shunt-res = <10000>;
> + rail-name = "VDD";
> + channel_enabled;
> + };
> + ch2: channel@1 {
> + uohms-shunt-res = <10000>;
> + rail-name = "VDDA25";
> + channel_enabled;
> + };
> + ch3: channel@2 {
> + uohms-shunt-res = <10000>;
> + rail-name = "VDD25";
> + channel_enabled;
> + };
> + ch4: channel@3 {
> + uohms-shunt-res = <10000>;
> + rail-name = "VDDA";
> + channel_enabled;
> + };
> + };
> + };
> + emac0: ethernet@20110000 {
> + compatible = "cdns,macb";
> + reg = <0x0 0x20110000 0x0 0x2000>;
> + interrupt-parent = <&plic>;
> + interrupts = <64 65 66 67>;
> + mac-address = [00 00 00 00 00 00];
> + phy-mode = "sgmii";
> + clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AXI>;
> + clock-names = "pclk", "hclk";
> + status = "disabled";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + phy0: ethernet-phy@8 {
> + reg = <8>;
> + ti,fifo-depth = <0x01>;
> + };
> + };
> + emac1: ethernet@20112000 {
> + compatible = "cdns,macb";
> + reg = <0x0 0x20112000 0x0 0x2000>;
> + interrupt-parent = <&plic>;
> + interrupts = <70 71 72 73>;
> + mac-address = [00 00 00 00 00 00];
> + phy-mode = "sgmii";
> + clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
> + clock-names = "pclk", "hclk";
> + status = "okay";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + phy1: ethernet-phy@9 {
> + reg = <9>;
> + ti,fifo-depth = <0x01>;
> + };
> + };
> + gpio: gpio@0x20122000 {
> + compatible = "microsemi,ms-pf-mss-gpio";
> + interrupt-parent = <&plic>;
> + interrupts = <13 14 15 16 17 18 19 20 21 22 23 24 25
> 26
> + 27 28 29 30 31 32 33 34 35 36 37 38 39
> + 40 41 42 43 44>;
> + gpio-controller;
> + clocks = <&clkcfg CLK_GPIO2>;
> + reg = <0x00 0x20122000 0x0 0x1000>;
> + reg-names = "control";
> + #gpio-cells = <2>;
> + status = "disabled";
> + };
> + };
> +};
Is there any Linux kernel upstream plan for the device tree?
To align with the FU540, it's better to keep the U-Boot specific dts
fragment into a -uboot.dtsi file.
Regards,
Bin
