[PATCH] mmc: mtk-sd: change some dev_err into dev_dbg

[Fabien Parent]

dev_err has been used for debugging and a few dev_err message are
printed for normal code execution. Make them dev_dbg instead.

Signed-off-by: Fabien Parent <fpar...@baylibre.com>
---
 drivers/mmc/mtk-sd.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c
index bd1fb09d1c9b..40b0deb6b756 100644
--- a/drivers/mmc/mtk-sd.c
+++ b/drivers/mmc/mtk-sd.c
@@ -1169,7 +1169,7 @@ skip_fall:
                        internal_delay |= (1 << i);
        }
 
-       dev_err(dev, "Final internal delay: 0x%x\n", internal_delay);
+       dev_dbg(dev, "Final internal delay: 0x%x\n", internal_delay);
 
        internal_delay_phase = get_best_delay(host, internal_delay);
        clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRRDLY_M,
@@ -1177,7 +1177,7 @@ skip_fall:
                        MSDC_PAD_TUNE_CMDRRDLY_S);
 
 skip_internal:
-       dev_err(dev, "Final cmd pad delay: %x\n", final_delay);
+       dev_dbg(dev, "Final cmd pad delay: %x\n", final_delay);
        return final_delay == 0xff ? -EIO : 0;
 }
 
@@ -1263,7 +1263,7 @@ skip_fall:
                                host->hs200_write_int_delay <<
                                MSDC_PAD_TUNE_DATWRDLY_S);
 
-       dev_err(dev, "Final data pad delay: %x\n", final_delay);
+       dev_dbg(dev, "Final data pad delay: %x\n", final_delay);
 
        return final_delay == 0xff ? -EIO : 0;
 }
-- 
2.28.0