There shouldn't be a need to use loadables propertyn because u-boot can be
pointed by firmware property. This change should also speedup boot process
because loadables property is list of strings which code is going through.
On the other hand firmware can just point to one image.
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---
Changes in v2:
- Also add dhcor
- Fix subject typo
Only done based on grepping the code. Please retest.
---
board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its | 8 ++++----
board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its
b/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its
index 905be57dffd7..dfe89bfad67e 100644
--- a/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its
+++ b/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its
@@ -39,28 +39,28 @@
config-1 {
/* DT+SoM+board model */
description =
"dh,stm32mp15xx-dhcom-pdk2_somrev0_boardrev0";
- loadables = "uboot";
+ firmware = "uboot";
fdt = "fdt-1";
};
config-2 {
/* DT+SoM+board model */
description =
"dh,stm32mp15xx-dhcom-pdk2_somrev1_boardrev0";
- loadables = "uboot";
+ firmware = "uboot";
fdt = "fdt-1";
};
config-3 {
/* DT+SoM+board model */
description =
"dh,stm32mp15xx-dhcom-drc02_somrev0_boardrev0";
- loadables = "uboot";
+ firmware = "uboot";
fdt = "fdt-2";
};
config-4 {
/* DT+SoM+board model */
description =
"dh,stm32mp15xx-dhcom-drc02_somrev1_boardrev0";
- loadables = "uboot";
+ firmware = "uboot";
fdt = "fdt-2";
};
diff --git a/board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its
b/board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its
index 7419684f5599..0ea10a14972e 100644
--- a/board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its
+++ b/board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its
@@ -31,7 +31,7 @@
config-1 {
/* DT+SoM+board model */
description =
"arrow,stm32mp15xx-avenger96_somrev0_boardrev1";
- loadables = "uboot";
+ firmware = "uboot";
fdt = "fdt-1";
};
--
2.28.0
