On 15.08.20 17:52, Sean Anderson wrote:
> This patch adds the necessary device tree bindings.
>
> Signed-off-by: Sean Anderson <sean...@gmail.com>
> Reviewed-by: Simon Glass <s...@chromium.org>
> ---
>
> (no changes since v2)
>
> Changes in v2:
> - Convert to use pinmux property
> - Don't hog ISP on boot
> - Re-order GPIOs to match the defaults more closely
>
> arch/riscv/dts/k210-maix-bit.dts | 104 +++++++++++++++++++++++++++++++
> arch/riscv/dts/k210.dtsi | 12 ++++
> 2 files changed, 116 insertions(+)
>
> diff --git a/arch/riscv/dts/k210-maix-bit.dts
> b/arch/riscv/dts/k210-maix-bit.dts
> index 5b32c5fd5f..e840e04ada 100644
> --- a/arch/riscv/dts/k210-maix-bit.dts
> +++ b/arch/riscv/dts/k210-maix-bit.dts
> @@ -17,6 +17,22 @@
> stdout-path = "serial0:115200";
> };
>
> + gpio-leds {
> + compatible = "gpio-leds";
> +
> + green {
> + gpios = <&gpio1_0 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + red {
> + gpios = <&gpio1_0 5 GPIO_ACTIVE_LOW>;
> + };
> +
> + blue {
> + gpios = <&gpio1_0 6 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> sound {
> compatible = "simple-audio-card";
> simple-audio-card,format = "i2s";
> @@ -39,9 +55,97 @@
> };
>
> &uarths0 {
> + pinctrl-0 = <&fpioa_uarths>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&gpio0 {
> + pinctrl-0 = <&fpioa_gpiohs>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&gpio1 {
> + pinctrl-0 = <&fpioa_gpio>;
> + pinctrl-names = "default";
> status = "okay";
> };
>
> &i2s0 {
> #sound-dai-cells = <1>;
> + pinctrl-0 = <&fpioa_i2s0>;
> + pinctrl-names = "default";
> +};
> +
> +&fpioa {
> + status = "okay";
> +
> + fpioa_uarths: uarths {
> + pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
> + <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
> + };
> +
> + fpioa_gpio: gpio {
> + pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
> + <K210_FPIOA(9, K210_PCF_GPIO1)>,
> + <K210_FPIOA(10, K210_PCF_GPIO2)>,
> + <K210_FPIOA(11, K210_PCF_GPIO3)>,
> + <K210_FPIOA(12, K210_PCF_GPIO4)>,
> + <K210_FPIOA(13, K210_PCF_GPIO5)>,
> + <K210_FPIOA(14, K210_PCF_GPIO6)>,
> + <K210_FPIOA(15, K210_PCF_GPIO7)>;
On the Maixduino the K210 package pins IO_6 - IO_9, IO_25 - IO_29 serve
as interface to the ESP32 which is used for WLAN. In the schema for the
Maixduino the naming is:
IO_6 - ESP32_TX
IO_7 - ESP32_RX
IO_8 - ESP32_EN
IO_9 - ESP32_READY
IO_6 and IO_7 are not mapped in reset state and in a Python example I
found for connecting to a WLAN these lines were not used.
If the usage of IO_8 and IO_9 differs between the Maixduino and the Maix
Bit, shouldn't they be mapped in k210-maix-bit.dts instead of k210.dtsi?
According to https://github.com/sipeed/MaixPy/issues/127 one of the SPI
interfaces is switched between SD-card and WLAN. The ESP32 connection
uses gpiohs while the SD card does not.
> + };
> +
> + fpioa_gpiohs: gpiohs {
> + pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
IO_16 is connected to the boot button on the Maixduino and Maix Fit
boards. So I guess we should add an entry compatible = "gpio-keys" for
it and add a comment here.
> + <K210_FPIOA(17, K210_PCF_GPIOHS1)>,
> + <K210_FPIOA(21, K210_PCF_GPIOHS5)>,
> + <K210_FPIOA(22, K210_PCF_GPIOHS6)>,
> + <K210_FPIOA(23, K210_PCF_GPIOHS7)>,
> + <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
> + <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
> + <K210_FPIOA(30, K210_PCF_GPIOHS14)>,
> + <K210_FPIOA(31, K210_PCF_GPIOHS15)>,
> + <K210_FPIOA(32, K210_PCF_GPIOHS16)>,
> + <K210_FPIOA(33, K210_PCF_GPIOHS17)>,
> + <K210_FPIOA(34, K210_PCF_GPIOHS18)>,
> + <K210_FPIOA(35, K210_PCF_GPIOHS19)>;
> + };
> +
> + fpioa_i2s0: i2s0 {
> + pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
> + <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
> + <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
> + };
> +
> + fpioa_dvp: dvp {
> + pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
DVP_SDA in 'Maix-Bit-V2.0(Pin assignment table.xlsx'
> + <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
DVP_SCL
> + <K210_FPIOA(42, K210_PCF_DVP_RST)>,
DVP_RST
> + <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
DVP_VSYNC
> + <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
DVP_PWDN
> + <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
DVP_HSYNC
> + <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
DVP_XCLK
> + <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
DVP_PCLK
> + };
> +
> + fpioa_spi0: spi0 {
> + pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>, /* cs */
LCD_CS in 'Maix-Bit-V2.0(Pin assignment table.xlsx'
> + <K210_FPIOA(37, K210_PCF_GPIOHS21)>, /* rst */
LCD_RST
> + <K210_FPIOA(38, K210_PCF_GPIOHS22)>, /* dc */
LCD_DC
> + <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
LCD_WR
Should the comments be updated to reflect the connection to LCD?
> + };
> +
> + fpioa_spi1: spi1 {
> + pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
SPI0 MISO in 'Maix-Bit-V2.0(Pin assignment table.xlsx'
> + <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
SPI0 SCLK
> + <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
SPI0 MOSI
> + <K210_FPIOA(29, K210_PCF_GPIOHS13)>;
SPI0_CS0
Should we add comments?
Best regards
Heinrich
> + };
> +};
> +
> +&dvp0 {
> + pinctrl-0 = <&fpioa_dvp>;
> + pinctrl-names = "default";
> };
> diff --git a/arch/riscv/dts/k210.dtsi b/arch/riscv/dts/k210.dtsi
> index 2546c7d4e0..fc7986b326 100644
> --- a/arch/riscv/dts/k210.dtsi
> +++ b/arch/riscv/dts/k210.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/clock/k210-sysctl.h>
> #include <dt-bindings/mfd/k210-sysctl.h>
> +#include <dt-bindings/pinctrl/k210-pinctrl.h>
> #include <dt-bindings/reset/k210-sysctl.h>
>
> / {
> @@ -367,7 +368,18 @@
> reg = <0x502B0000 0x100>;
> clocks = <&sysclk K210_CLK_FPIOA>;
> resets = <&sysrst K210_RST_FPIOA>;
> + kendryte,sysctl = <&sysctl>;
> + kendryte,power-offset = <K210_SYSCTL_POWER_SEL>;
> + pinctrl-0 = <&fpioa_jtag>;
> + pinctrl-names = "default";
> status = "disabled";
> +
> + fpioa_jtag: jtag {
> + pinmux = <K210_FPIOA(0,
> K210_PCF_JTAG_TCLK)>,
> + <K210_FPIOA(1,
> K210_PCF_JTAG_TDI)>,
> + <K210_FPIOA(2,
> K210_PCF_JTAG_TMS)>,
> + <K210_FPIOA(3,
> K210_PCF_JTAG_TDO)>;
> + };
> };
>
> sha256: sha256@502C0000 {
>
