There is a driver to support built in USB controller now, so lets add the USB
nodes to DTSI.
Signed-off-by: Robert Marko <robert.ma...@sartura.hr>
---
arch/arm/dts/qcom-ipq4019.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/dts/qcom-ipq4019.dtsi b/arch/arm/dts/qcom-ipq4019.dtsi
index 67122de9c0..e82f1253a1 100644
--- a/arch/arm/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/dts/qcom-ipq4019.dtsi
@@ -89,5 +89,23 @@
gpio-bank-name="soc";
#gpio-cells = <2>;
};
+
+ usb3: xhci@8a00000 {
+ compatible = "qcom,dwc3-ipq";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x8a00000 0xcd00>;
+ rst-ctrl = <0x181E038 0x4>;
+ status = "disabled";
+ };
+
+ usb2: xhci@6000000 {
+ compatible = "qcom,dwc3-ipq";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000000 0xcd00>;
+ rst-ctrl = <0x181E01C 0x4>;
+ status = "disabled";
+ };
};
};
--
2.26.2
