On 7/9/20 9:35 AM, Patrick DELAUNAY wrote: > Hi Marcin, > >> From: Marcin Sloniewski <marcin.sloniew...@gmail.com> >> Sent: mercredi 8 juillet 2020 19:56 >> >> This commit adds device tree files supporting SBC from Seeed Studio based on >> STM32MP157C. >> >> This works with generic stm32mp1 config. >> Right now only booting from SD card is supported. >> >> Signed-off-by: Marcin Sloniewski <marcin.sloniew...@gmail.com> >> --- >> >> Changes in v6: >> - forgot to add changes in v5 ;( >> >> Changes in v5: >> - removed description of PLL1 which is now handled by OPP info >> - removed cd-gpio for sdmmc1 since it is not yet supported >> >> Changes in v4: >> - removed unnecessary pull up on uart4 rx >> >> Changes in v3: >> - changed name of dts files from odyssey-stm32mp157c... >> to stm32mp157c-odyssey... >> - removed usbotg node config >> - add new board in dts/Makefile in alphabetical order >> >> Changes in v2: >> - removed `st,adc_usb_pd` from config since that >> adc connection is non-existent which caused >> warning or hang during boot >> >> arch/arm/dts/Makefile | 1 + >> .../dts/stm32mp157c-odyssey-som-u-boot.dtsi | 125 ++++++ >> arch/arm/dts/stm32mp157c-odyssey-som.dtsi | 364 ++++++++++++++++++ >> arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi | 58 +++ >> arch/arm/dts/stm32mp157c-odyssey.dts | 161 ++++++++ >> 5 files changed, 709 insertions(+) >> create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi >> create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi >> create mode 100644 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi >> create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dts >> > Reviewed-by: Patrick Delaunay <patrick.delau...@st.com> > > Thanks > > Patrick Applied to u-boot-stm/master
Thanks Patrice
