Enable eMMC HS400 mode support on LX2160ARDB.
Signed-off-by: Yangbo Lu <yangbo...@nxp.com>
---
Changes for v2:
- None.
---
configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 1 +
configs/lx2160ardb_tfa_defconfig | 1 +
configs/lx2160ardb_tfa_stmm_defconfig | 1 +
3 files changed, 3 insertions(+)
diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
index 12e224f..6c65853 100644
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@@ -40,6 +40,7 @@ CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_DEFAULT_BUS_NUMBER=0
CONFIG_DM_MMC=y
+CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig
index a5c78d2..a5c60c8 100644
--- a/configs/lx2160ardb_tfa_defconfig
+++ b/configs/lx2160ardb_tfa_defconfig
@@ -46,6 +46,7 @@ CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_DEFAULT_BUS_NUMBER=0
CONFIG_DM_MMC=y
+CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
diff --git a/configs/lx2160ardb_tfa_stmm_defconfig
b/configs/lx2160ardb_tfa_stmm_defconfig
index e97c9b0..869d4e2 100644
--- a/configs/lx2160ardb_tfa_stmm_defconfig
+++ b/configs/lx2160ardb_tfa_stmm_defconfig
@@ -48,6 +48,7 @@ CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_DEFAULT_BUS_NUMBER=0
CONFIG_DM_MMC=y
+CONFIG_MMC_HS400_SUPPORT=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
--
2.7.4
