Hi Zhiqiang, On Wed, 1 Jul 2020 at 20:05, Zhiqiang Hou <zhiqiang....@nxp.com> wrote: > > From: Hou Zhiqiang <zhiqiang....@nxp.com> > > This patch set depends on: > https://patchwork.ozlabs.org/project/uboot/patch/20200503185227.28731-2-olte...@gmail.com/ > > Hou Zhiqiang (16): > net: fsl_mdio: Change to use virtual address > net: fsl_mdio: Correct the MII management register block address > net: tsec: convert to use DM_MDIO when DM_ETH enabled > net: tsec: Add fixed-link PHY support > net: tsec: Add the compatible string "gianfar" support > powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled > fsl: p1_p2_rdb: Move vsc7835 firmware uploading to > board_early_init_r() > configs: p1_p2_rdb: Add the default address of vsc7385 firmware > dts: powerpc: p1020rdb: Add eTSEC DT nodes > powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled > configs: P1020RDB: Enable DM_ETH config > dts: powerpc: p1010rdb: Add eTSEC DT nodes > powerpc: p1010rdb: Compile legacy ethernet init function when no > DM_ETH > configs: P1010RDB: Enable DM_ETH config > dts: powerpc: p2020rdb: Add eTSEC DT nodes > configs: P2020RDB: Enable DM_ETH config > > arch/powerpc/cpu/mpc8xxx/cpu.c | 2 + > arch/powerpc/dts/p1010rdb-pa.dts | 1 + > arch/powerpc/dts/p1010rdb-pa_36b.dts | 1 + > arch/powerpc/dts/p1010rdb.dtsi | 50 +++++++++++++++ > arch/powerpc/dts/p1010si-post.dtsi | 25 ++++++++ > arch/powerpc/dts/p1020-post.dtsi | 20 +++++- > arch/powerpc/dts/p1020rdb-pc.dts | 1 + > arch/powerpc/dts/p1020rdb-pc.dtsi | 55 ++++++++++++++++ > arch/powerpc/dts/p1020rdb-pc_36b.dts | 1 + > arch/powerpc/dts/p1020rdb-pd.dts | 45 ++++++++++++++ > arch/powerpc/dts/p2020-post.dtsi | 10 ++- > arch/powerpc/dts/p2020rdb-pc.dts | 1 + > arch/powerpc/dts/p2020rdb-pc.dtsi | 50 +++++++++++++++ > arch/powerpc/dts/p2020rdb-pc_36b.dts | 1 + > arch/powerpc/dts/pq3-etsec1-0.dtsi | 28 +++++++++ > arch/powerpc/dts/pq3-etsec1-1.dtsi | 28 +++++++++ > arch/powerpc/dts/pq3-etsec1-2.dtsi | 28 +++++++++ > arch/powerpc/dts/pq3-etsec1-3.dtsi | 28 +++++++++ > arch/powerpc/dts/pq3-etsec2-0.dtsi | 35 +++++++++++ > arch/powerpc/dts/pq3-etsec2-1.dtsi | 35 +++++++++++ > arch/powerpc/dts/pq3-etsec2-2.dtsi | 35 +++++++++++ > arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi | 16 +++++ > arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi | 16 +++++ > arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi | 16 +++++ > board/freescale/p1010rdb/p1010rdb.c | 2 + > board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 37 ++++++----- > configs/P1010RDB-PA_36BIT_NAND_defconfig | 2 + > configs/P1010RDB-PA_36BIT_NOR_defconfig | 2 + > configs/P1010RDB-PA_36BIT_SDCARD_defconfig | 2 + > configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 2 + > configs/P1010RDB-PA_NAND_defconfig | 2 + > configs/P1010RDB-PA_NOR_defconfig | 2 + > configs/P1010RDB-PA_SDCARD_defconfig | 2 + > configs/P1010RDB-PA_SPIFLASH_defconfig | 2 + > configs/P1010RDB-PB_36BIT_NAND_defconfig | 2 + > configs/P1010RDB-PB_36BIT_NOR_defconfig | 2 + > configs/P1010RDB-PB_36BIT_SDCARD_defconfig | 2 + > configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 2 + > configs/P1010RDB-PB_NAND_defconfig | 2 + > configs/P1010RDB-PB_NOR_defconfig | 2 + > configs/P1010RDB-PB_SDCARD_defconfig | 2 + > configs/P1010RDB-PB_SPIFLASH_defconfig | 2 + > configs/P1020RDB-PC_36BIT_NAND_defconfig | 3 + > configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 3 + > configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 3 + > configs/P1020RDB-PC_36BIT_defconfig | 3 + > configs/P1020RDB-PC_NAND_defconfig | 3 + > configs/P1020RDB-PC_SDCARD_defconfig | 3 + > configs/P1020RDB-PC_SPIFLASH_defconfig | 3 + > configs/P1020RDB-PC_defconfig | 3 + > configs/P1020RDB-PD_NAND_defconfig | 3 + > configs/P1020RDB-PD_SDCARD_defconfig | 3 + > configs/P1020RDB-PD_SPIFLASH_defconfig | 3 + > configs/P1020RDB-PD_defconfig | 3 + > configs/P2020RDB-PC_36BIT_NAND_defconfig | 3 + > configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 3 + > configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 3 + > configs/P2020RDB-PC_36BIT_defconfig | 3 + > configs/P2020RDB-PC_NAND_defconfig | 3 + > configs/P2020RDB-PC_SDCARD_defconfig | 3 + > configs/P2020RDB-PC_SPIFLASH_defconfig | 3 + > configs/P2020RDB-PC_defconfig | 3 + > doc/device-tree-bindings/net/fsl-tsec-phy.txt | 2 +- > drivers/net/fsl_mdio.c | 28 +++++++-- > drivers/net/tsec.c | 62 ++++++++----------- > include/configs/p1_p2_rdb_pc.h | 2 + > include/fsl_mdio.h | 4 ++ > include/tsec.h | 4 ++ > 68 files changed, 698 insertions(+), 63 deletions(-) > create mode 100644 arch/powerpc/dts/p1020rdb-pc.dtsi > create mode 100644 arch/powerpc/dts/p2020rdb-pc.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec1-0.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec1-1.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec1-2.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec1-3.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec2-0.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec2-1.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec2-2.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi > > -- > 2.25.1 >
The point with the Acked-by/Reviewed-by/Tested-by tags is that you copy them to your next patch submissions, such that the maintainers see which patches have had eyes on them already, so that they don't need to look through them again. Thanks, -Vladimir
