Hi Alex,

Am 29.06.2020 um 05:23 schrieb David Wu:
Hi Alexander,

Thank you for your patch, the grf header file is missing for rk3066, the GRF_SOC_CON1 offset of 3066 is 0x154, the corresponding bit of i2c0~i2c4 is also bit11 ~ bit15.

There is currently no support for rk3066 at mainline, rk3066 is not handled here, I think it’s okay, so,

Reviewed-by: David Wu <david...@rock-chips.com>

Reviewed-by: Heiko Schocher <h...@denx.de>

@Kever: Do you pickup this patch?
  (I cannot find it in patchwork, is it assigned to you?)

bye,
Heiko

在 2020/6/27 下午11:03, Alexander Kochetkov 写道:
To make clear, there is kernel driver i2c-rk3x.c.
For rk3066 it write bits in the GRF word at offset 0x154. See [1] and [2].

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/i2c/busses/i2c-rk3x.c#n1236 [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/i2c/busses/i2c-rk3x.c#n1137

In u-boot there is include file cru_rk3036.h [3]. If this include file valid for rk3066, than offset 0x154 correspond to soc_con3 register. But all documentation I found for 30xx SoC clarify that I2C switch bits located in the
soc_con1 registers.

So I don’t know correct location for I2C switch bits.

[3] 
https://github.com/u-boot/u-boot/blob/master/arch/arm/include/asm/arch-rockchip/cru_rk3036.h


27 июня 2020 г., в 17:17, Kever Yang <kever.y...@rock-chips.com> написал(а):

+David,

Hi David,

     Could you help to commend on this?


Hi Alex,

     Thanks for your patch.

On 2020/6/22 下午9:06, Alexander Kochetkov wrote:
The commit e7ae4cf27a6d 'pinctrl: rockchip: Add common rockchip
pinctrl driver' dropped rk3188_pinctrl_request operation, that
did switching to new implementation.

This commit implement switching to new implementation using
writing bits to GRF.

I don't have rk3060
rk3066
  board to test, so switching implemented
as a stub returning -ENOSYS.

Signed-off-by: Alexander Kochetkov <al.koc...@gmail.com>
---
  drivers/i2c/rk_i2c.c | 42 +++++++++++++++++++++++++++++++-----------
  1 file changed, 31 insertions(+), 11 deletions(-)

diff --git a/drivers/i2c/rk_i2c.c b/drivers/i2c/rk_i2c.c
index 32b2ee8578..ad3c66843b 100644
--- a/drivers/i2c/rk_i2c.c
+++ b/drivers/i2c/rk_i2c.c
@@ -15,6 +15,8 @@
  #include <asm/arch-rockchip/clock.h>
  #include <asm/arch-rockchip/i2c.h>
  #include <asm/arch-rockchip/periph.h>
+#include <asm/arch-rockchip/grf_rk3188.h>
+#include <syscon.h>
  #include <dm/pinctrl.h>
  #include <linux/sizes.h>
  @@ -41,6 +43,7 @@ enum {
   */
  struct rk_i2c_soc_data {
      int controller_type;
+    int (*switch_to_new_type)(int bus_nr);
  };
    static inline void rk_i2c_get_div(int div, int *divh, int *divl)
@@ -388,11 +391,33 @@ static int rockchip_i2c_ofdata_to_platdata(struct udevice 
*bus)
      return 0;
  }
  +static int rockchip_i2c_switch_to_new_type_rk3066(int bus_nr)
+{
+    return -ENOSYS;
+}
+
+static int rockchip_i2c_switch_to_new_type_rk3188(int bus_nr)
+{
+    struct rk3188_grf *grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+
+    if (grf == NULL)
+        return -ENOSYS;
+
+    if (bus_nr < 0 || bus_nr > (RKI2C4_SEL_SHIFT - RKI2C0_SEL_SHIFT))
+        return -EINVAL;
+
+    /* enable new i2c controller */
+    rk_clrsetreg(&grf->soc_con1,
+             1 << (RKI2C0_SEL_SHIFT + bus_nr),
+             1 << (RKI2C0_SEL_SHIFT + bus_nr));
+
+    return 0;
+}
+
  static int rockchip_i2c_probe(struct udevice *bus)
  {
      struct rk_i2c *priv = dev_get_priv(bus);
      struct rk_i2c_soc_data *soc_data;
-    struct udevice *pinctrl;
      int bus_nr;
      int ret;
  @@ -408,17 +433,10 @@ static int rockchip_i2c_probe(struct udevice *bus)
              return ret;
          }
  -        ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
-        if (ret) {
-            debug("%s: Cannot find pinctrl device\n", __func__);
-            return ret;
-        }
-
-        /* pinctrl will switch I2C to new type */
-        ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_I2C0 + bus_nr);
-        if (ret) {
+        ret = soc_data->switch_to_new_type(bus_nr);
+        if (ret < 0) {
              debug("%s: Failed to switch I2C to new type %s: %d\n",
-                __func__, bus->name, ret);
+             __func__, bus->name, ret);
              return ret;
          }
      }
@@ -433,10 +451,12 @@ static const struct dm_i2c_ops rockchip_i2c_ops = {
    static const struct rk_i2c_soc_data rk3066_soc_data = {
      .controller_type = RK_I2C_LEGACY,
+    .switch_to_new_type = rockchip_i2c_switch_to_new_type_rk3066,
  };
    static const struct rk_i2c_soc_data rk3188_soc_data = {
      .controller_type = RK_I2C_LEGACY,
+    .switch_to_new_type = rockchip_i2c_switch_to_new_type_rk3188,
  };
    static const struct rk_i2c_soc_data rk3228_soc_data = {









--
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: h...@denx.de

Reply via email to