SPL_ATF_NO_PLATFORM_PARAM is selected by default for RK3399 configs, to guard against issues when used with TF-A versions that perform insufficient validation on the platform parameter. However, since commit 8109f738ffa7 "rockchip: increase FDT buffer size" in TF-A, passing a device tree as platform parameter no longer causes problems for upstream TF-A for RK3399.
Since SPL_ATF_NO_PLATFORM_PARAM doesn't need to be selected when using upstream TF-A, change the Kconfig option from select to imply. It'll still default to being selected but can be deselected by a user if they know they will be using a compatible version of TF-A. Signed-off-by: Hugh Cole-Baker <sigma...@gmail.com> --- For some background, see this thread on the TF-A list [1]. Since the corresponding required change isn't in a tagged version of TF-A yet, and I don't know how many RK3399 boards are normally used with older TF-A versions which required this option, I think it's safest to keep the default as not sending a platform param to TF-A. Once the next TF-A version is released, SPL_ATF_NO_PLATFORM_PARAM could be turned off in defconfigs for boards that use the latest upstream TF-A. [1]: https://lists.trustedfirmware.org/pipermail/tf-a/2020-June/000502.html arch/arm/mach-rockchip/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 0cb1f23d0f3..e2b63265846 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -207,7 +207,6 @@ config ROCKCHIP_RK3399 select SUPPORT_TPL select SPL select SPL_ATF - select SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF select SPL_BOARD_INIT if SPL select SPL_LOAD_FIT select SPL_CLK if SPL @@ -232,6 +231,7 @@ config ROCKCHIP_RK3399 imply PRE_CONSOLE_BUFFER imply ROCKCHIP_COMMON_BOARD imply ROCKCHIP_SDRAM_COMMON + imply SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF imply SPL_ROCKCHIP_COMMON_BOARD imply TPL_SERIAL_SUPPORT imply TPL_LIBCOMMON_SUPPORT -- 2.17.2 (Apple Git-113)
