From: Hou Zhiqiang <zhiqiang....@nxp.com>
P1010RDB implements 3 enhanced three-speed Ethernet controllers,
and the connection is shown below:
eTSEC1: Connected to RGMII PHY AR8033
eTSEC2: Connected to SGMII PHY AR8033
eTSEC3: Connected to SGMII PHY AR8033
Signed-off-by: Hou Zhiqiang <zhiqiang....@nxp.com>
---
V3:
- Rebase the patch, no change intended.
arch/powerpc/dts/p1010rdb-pa.dts | 1 +
arch/powerpc/dts/p1010rdb-pa_36b.dts | 1 +
arch/powerpc/dts/p1010rdb.dtsi | 62 ++++++++++++++++++++++++++++
arch/powerpc/dts/p1010si-post.dtsi | 25 +++++++++++
4 files changed, 89 insertions(+)
diff --git a/arch/powerpc/dts/p1010rdb-pa.dts b/arch/powerpc/dts/p1010rdb-pa.dts
index c66c4923ac..360d254d91 100644
--- a/arch/powerpc/dts/p1010rdb-pa.dts
+++ b/arch/powerpc/dts/p1010rdb-pa.dts
@@ -15,3 +15,4 @@
};
/include/ "p1010si-post.dtsi"
+/include/ "p1010rdb.dtsi"
diff --git a/arch/powerpc/dts/p1010rdb-pa_36b.dts
b/arch/powerpc/dts/p1010rdb-pa_36b.dts
index b943de7cbb..062086a8c0 100644
--- a/arch/powerpc/dts/p1010rdb-pa_36b.dts
+++ b/arch/powerpc/dts/p1010rdb-pa_36b.dts
@@ -15,3 +15,4 @@
};
/include/ "p1010si-post.dtsi"
+/include/ "p1010rdb.dtsi"
diff --git a/arch/powerpc/dts/p1010rdb.dtsi b/arch/powerpc/dts/p1010rdb.dtsi
index 4f58ee2446..f7662648e5 100644
--- a/arch/powerpc/dts/p1010rdb.dtsi
+++ b/arch/powerpc/dts/p1010rdb.dtsi
@@ -5,6 +5,68 @@
* Copyright 2020 NXP
*/
&soc {
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ reg = <0x1>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <0x0>;
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ tbi-phy@3 {
+ device_type = "tbi-phy";
+ reg = <0x3>;
+ };
+ };
+
+ mdio@25000 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26000 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ ptp_clock@b0e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0xb0e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <10>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0x80000016>;
+ fsl,tmr-fiper1 = <999999990>;
+ fsl,tmr-fiper2 = <99990>;
+ fsl,max-adj = <199999999>;
+ };
+
+ enet0: ethernet@b0000 {
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy2>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "sgmii";
+ };
+
i2c@3000 {
rtc@68 {
compatible = "pericom,pt7c4338";
diff --git a/arch/powerpc/dts/p1010si-post.dtsi
b/arch/powerpc/dts/p1010si-post.dtsi
index 0289441381..f825208056 100644
--- a/arch/powerpc/dts/p1010si-post.dtsi
+++ b/arch/powerpc/dts/p1010si-post.dtsi
@@ -25,6 +25,31 @@
};
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: ethernet@b0000 {
+ queue-group@b0000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: ethernet@b1000 {
+ queue-group@b1000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+ };
+
+/include/ "pq3-etsec2-2.dtsi"
+ enet2: ethernet@b2000 {
+ queue-group@b2000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+
+ };
};
/* controller at 0x9000 */
--
2.25.1
