-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
here is the implementation of the functions:
# function ota_conv_sizes
# Convert a bytes size to a block size
# input bytesize : size in bytes to convert
# input blksize : size of a block in bytes
# output num_blk : converted size in blocks
setenv ota_conv_sizes 'setexpr num_blk $bytesize / $blksize ; setexpr
mod_blk $bytesize % $blksize ; if itest $mod_blk > 0 ; then setexpr num_blk
$num_blk + 1; fi;'
# function ota_mmc_write
# Write a memory buffer to mmc drive
# input floadaddr : address of buffer to write
# input u_part_start : block start in mmc
# input num_blk : number of block to write
setenv ota_mmc_write 'if itest $ota_verbose == 1 ; then echo "mmc write
${floadaddr} ${u_part_start} ${num_blk};"; fi; mmc write $floadaddr
$u_part_start $num_blk; ret=$?; if itest $ret != 0 ; then setenv
ota_abort_reason "mmc write ${floadaddr} ${u_part_start} ${num_blk}
failed"; setenv ota_abort 1; fi;'
the old u-boot version supported 'part info mmc 0:${u_part_num}
u_part_start u_part_sz u_part_blksz;' to get the block size.
# function ota_get_partition_attributes
# Retrieve partition attribute
# input u_part_num : partition number
# output u_part_start : partition start block number
# output u_part_sz : partition size in blocks
# output u_part_blksz : partition block size in bytes
setenv ota_get_partition_attributes 'if itest $ota_verbose == 1 ; then echo
"part info mmc 0:${u_part_num} u_part_start u_part_sz u_part_blksz;"; fi;
part info mmc 0:${u_part_num} u_part_start u_part_sz u_part_blksz;ret=$?;
if itest $ret != 0 ; then setenv ota_abort_reason "part info mmc
0:${u_part_num} u_part_start u_part_sz u_part_blksz failed: ${ret}"; setenv
ota_abort 1; fi;'
the new u-boot does not, so we need an explicit command 'part block mmc 0
${u_part_lbl} u_part_blksz;'
# function ota_get_partition_attributes_alternative
# Retrieve partition attribute
# input u_part_lbl : partition label
# output u_part_start : partition start block number
# output u_part_sz : partition size in blocks
# output u_part_blksz : partition block size in bytes
setenv ota_get_partition_attributes_alternative 'if itest $ota_verbose == 1
; then echo "part start mmc 0 ${u_part_lbl} u_part_start; part size mmc 0
${u_part_lbl} u_part_sz; part block mmc 0 ${u_part_lbl} u_part_blksz;"; fi;
part start mmc 0 ${u_part_lbl} u_part_start;ret=$?; if itest $ret != 0 ;
then setenv ota_abort_reason "part start mmc 0 ${u_part_lbl} u_part_start
failed: ${ret}"; setenv ota_abort 1; fi; part size mmc 0 ${u_part_lbl}
u_part_sz;ret=$?; if itest $ret != 0 ; then setenv ota_abort_reason "part
size mmc 0 ${u_part_lbl} u_part_sz failed: ${ret}"; setenv ota_abort 1; fi;
part block mmc 0 ${u_part_lbl} u_part_blksz;ret=$?; if itest $ret != 0 ;
then setenv ota_abort_reason "part block mmc 0 ${u_part_lbl} u_part_blksz
failed: ${ret}"; setenv ota_abort 1; fi;'
On 2020-06-02 at 18:08, razvan.beche...@gmail.com wrote:
> setexpr can compute the divide/multiply part, but we still need to get
the
> partition block size somehow.
>
> I know that this is 0x200 by default, but we can not hardcode that in the
> scripts. we should read that from the partition info.
>
> On 2020-06-02 at 17:55, tr...@konsulko.com wrote:
> > On Mon, Jun 01, 2020 at 01:20:25PM +0300, razvan.beche...@gmail.com
> wrote:
> > >
> > > The Intel Edison OTA process requires a conversion of data size
> > > from bytes to number of blocks. The following functions are used:
> > >
> > > # function ota_conv_sizes
> > > # Convert a bytes size to a block size
> > > # input bytesize : size in bytes to convert
> > > # input blksize : size of a block in bytes
> > > # output num_blk : converted size in blocks
> > >
> > > # function ota_mmc_write
> > > # Write a memory buffer to mmc drive
> > > # input floadaddr : address of buffer to write
> > > # input u_part_start : block start in mmc
> > > # input num_blk : number of block to write
> > >
> > > This patch adds the cmd part sub-command 'block' which returns
> > > the partition block size in bytes.
> >
> > This is usually done with the setexpr command today, thanks!
> >
> > --
> > Tom
-----BEGIN PGP SIGNATURE-----
Version: FlowCrypt 7.7.7 Gmail Encryption
Comment: Seamlessly send and receive encrypted email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=sNXc
-----END PGP SIGNATURE-----
