OpenSBI generic platform support provides platform specific
functionality based on the FDT passed by previous booting stage.
Depends on OpenSBI commit:
platform: Add generic FDT based platform support
(sha1: f1aa9e54e00006ae70aeac638d5b75093520f65d)
Signed-off-by: Pragnesh Patel <pragnesh.pa...@sifive.com>
Reviewed-by: Bin Meng <bmeng...@gmail.com>
Reviewed-by: Jagan Teki <ja...@amarulasolutions.com>
---
doc/board/sifive/fu540.rst | 13 +------------
1 file changed, 1 insertion(+), 12 deletions(-)
diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst
index 5a37e0021d..4d7fded699 100644
--- a/doc/board/sifive/fu540.rst
+++ b/doc/board/sifive/fu540.rst
@@ -20,17 +20,6 @@ The support for following drivers are already enabled:
4. SiFive SPI Driver.
5. MMC SPI Driver for MMC/SD support.
-TODO:
-
-1. U-Boot expects the serial console device entry to be present under /chosen
- DT node. Without a serial console U-Boot will panic. Example:
-
-.. code-block:: none
-
- chosen {
- stdout-path = "/soc/serial@10010000:115200";
- };
-
Booting from MMC using FSBL
---------------------------
@@ -61,7 +50,7 @@ firmware. We need to compile OpenSBI with below command:
.. code-block:: none
-make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<path to u-boot-dtb.bin>
+ make PLATFORM=generic FW_PAYLOAD_PATH=<path to u-boot-dtb.bin>
More detailed description of steps required to build FW_PAYLOAD firmware
is beyond the scope of this document. Please refer OpenSBI documenation.
--
2.17.1
