[PATCH v13 12/19] riscv: sifive: dts: fu540: set ethernet clock rate

[Pragnesh Patel]

Set ethernet clock rate to 125 Mhz so that it will work with 1000Mbps,
Earlier this is done by FSBL. With this change We can remove the
ethernet clock rate code from FSBL.

Signed-off-by: Pragnesh Patel <pragnesh.pa...@sifive.com>
---
 arch/riscv/dts/fu540-c000-u-boot.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/riscv/dts/fu540-c000-u-boot.dtsi 
b/arch/riscv/dts/fu540-c000-u-boot.dtsi
index fc91a7c987..9bba554f9d 100644
--- a/arch/riscv/dts/fu540-c000-u-boot.dtsi
+++ b/arch/riscv/dts/fu540-c000-u-boot.dtsi
@@ -82,3 +82,8 @@
 &qspi2 {
        u-boot,dm-spl;
 };
+
+&eth0 {
+       assigned-clocks = <&prci PRCI_CLK_GEMGXLPLL>;
+       assigned-clock-rates = <125000000>;
+};
-- 
2.17.1