Hi Bin, On Mon, Apr 20, 2020 at 7:45 PM Bin Meng <[email protected]> wrote: > > Hi Jagan, > > On Mon, Apr 20, 2020 at 10:09 PM Jagan Teki <[email protected]> > wrote: > > > > On Mon, Apr 20, 2020 at 7:31 PM Bin Meng <[email protected]> wrote: > > > > > > Hi Jagan, > > > > > > On Mon, Apr 20, 2020 at 8:52 PM Jagan Teki <[email protected]> > > > wrote: > > > > > > > > For historical reasons the existing logic of filling tx fifo > > > > > > What historical reasons? > > > > No real idea, seems like exciting logic is developed to make mmc_spi > > workable. > > Could you put such "guessed reason" other than "historical" in the > commit message, to help better understanding?
Okay. > > > > > > > > > > with data, rx fifo with NULL for tx transfer and filling rx > > > > fifo with data, tx fifo with NULL for rx transfer is not > > > > clear enough to support the Quad Page Program. > > > > > > > > SiFive SPI controllers have specific sets of watermark > > > > registers and SPI I/O directions bits in order to program > > > > SPI controllers clear enough to support all sets of operating > > > > modes. > > > > > > > > Here is the exact programing sequence that would follow on this > > > > patch and tested via SPI-NOR and MMC_SPI. > > > > > > > > - set the frame format proto, endian > > > > - set the frame format dir, set it for tx and clear it for rx > > > > - TX transfer: > > > > fill tx fifo with data. > > > > wait for TX watermark bit to clear. > > > > - TX transfer: > > > > > > RX transfer ? > > > > Thanks, my bad. > > > > > > > > > fill tx fifo with 0xff. > > > > > > rx fifo ? > > > > No it is rx fifo in order to read the rx fifo we need to pass 0xff to > > I assume here it is tx fifo Yes it is tx fifo.
