вт, 7 апр. 2020 г. в 12:18, Michal Simek <mon...@monstr.eu>:
>
> On 07. 04. 20 11:16, Matwey V. Kornilov wrote:
> > вт, 7 апр. 2020 г. в 12:01, Michal Simek <mon...@monstr.eu>:
> >>
> >> On 07. 04. 20 9:58, Matwey V. Kornilov wrote:
> >>> пн, 6 апр. 2020 г. в 12:41, Michal Simek <mon...@monstr.eu>:
> >>>>
> >>>> Hi,
> >>>>
> >>>> On 06. 04. 20 10:14, Matwey V. Kornilov wrote:
> >>>>> 06.04.2020 11:12, Matwey V. Kornilov пишет:
> >>>>>> Hello,
> >>>>>>
> >>>>>> I am running u-boot 2020.04-rc4-00100-g74bf17db39 with
> >>>>>> zynq_z_turn_defconfig configuration on MYIR Z-Turn board.
> >>>>>> And I see the following when I am trying to run `dhcp' command.
> >>>>>>
> >>>>>>
> >>>>>> ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
> >>>>>> mdio_register: non unique device name 'eth0'
> >>>>>> ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
> >>>>>> mdio_register: non unique device name 'eth0'
> >>>>>> ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
> >>>>>> mdio_register: non unique device name 'eth0'
> >>>>>> ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
> >>>>>> mdio_register: non unique device name 'eth0'
> >>>>>> No ethernet found.
> >>>>>> ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
> >>>>>> mdio_register: non unique device name 'eth0'
> >>>>>>
> >>>>>
> >>>>> Full boot log is the following:
> >>>>>
> >>>>>
> >>>>> U-Boot SPL 2020.04-rc4-00100-g74bf17db39 (Apr 06 2020 - 11:00:45 +0300)
> >>>>> mmc boot
> >>>>> Trying to boot from MMC1
> >>>>> spl_load_image_fat_os: error reading image system.dtb, err - -2
> >>>>>
> >>>>>
> >>>>> U-Boot 2020.04-rc4-00100-g74bf17db39 (Apr 06 2020 - 11:00:45 +0300)
> >>>>>
> >>>>> CPU: Zynq 7z010
> >>>>> Silicon: v3.1
> >>>>> Model: Zynq Z-Turn MYIR Board
> >>>>> DRAM: ECC disabled 1 GiB
> >>>>> MMC: mmc@e0100000: 0
> >>>>> In: serial@e0001000
> >>>>> Out: serial@e0001000
> >>>>> Err: serial@e0001000
> >>>>> Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
> >>>>> Could not get PHY for eth0: addr 0
> >>>>> No ethernet found.
> >>>>>
> >>>>> Hit any key to stop autoboot: 0
> >>>>>
> >>>>
> >>>> u-boot is not able to find out your phy. Address is setup 0 which means
> >>>> u-boot should do it autodetection. I don't have this board here to tell
> >>>> you what can be wrong.
> >>>>
> >>>> Alex, Anton: Can you please comment it?
> >>>>
> >>>
> >>> Is there a chance that something is wrong with ps7_init_gpl.c ?
> >>> The Ethernet PHY doesn't work in Linux too with the similar error message.
> >>
> >> Did you validate any golden images that phy is fine?
> >
> > Yes, I did. There was microsd card supplied with the board (it has
> > U-Boot 2013.10-svn7 and 3.15.0-xilinx kernel). The Ethernet is working
> > with this image.
> >
> >>
> >> Anyway as I said I don't have this board here that's why guys who has it
> >> should debug it or patches welcome.
> >> Or 3rd option is if none wants to keep it alive I will remove support
> >> for it.
> >
> > Well, unfortunately, I have little knowledge how to debug this, but if
> > you have an ideas what could I check, please ask.
>
> This board is in mainline for a while. That's why you can go back to
> commit which introduced this board and try it. Then you can bisect it
> and see which commit breaks it.
Thanks. I've found where Ethernet was broken:
1f60789602e0d5f5f9a8b507f25737c65b5d8daa is the first bad commit
commit 1f60789602e0d5f5f9a8b507f25737c65b5d8daa
Author: Priyanka Jain <priyanka.j...@nxp.com>
Date: Tue Nov 5 04:05:11 2019 +0000
net/phy: Fix phy_connect() for phy addr 0
Fix 'mask' calculation in phy_connect() for phy addr '0'.
'mask' is getting set to '0xffffffff' for phy addr '0'
in phy_connect() whereas expected value is '0'.
Signed-off-by: Priyanka Jain <priyanka.j...@nxp.com>
Reported-by: tetsu-aoki via github
Acked-by: Joe Hershberger <joe.hershber...@ni.com>
>
> Thanks,
> Michal
>
> --
> Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
> w: www.monstr.eu p: +42-0-721842854
> Maintainer of Linux kernel - Xilinx Microblaze
> Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
> U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
>
--
With best regards,
Matwey V. Kornilov
