06.04.2020 11:12, Matwey V. Kornilov пишет: > Hello, > > I am running u-boot 2020.04-rc4-00100-g74bf17db39 with > zynq_z_turn_defconfig configuration on MYIR Z-Turn board. > And I see the following when I am trying to run `dhcp' command. > > > ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id > mdio_register: non unique device name 'eth0' > ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id > mdio_register: non unique device name 'eth0' > ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id > mdio_register: non unique device name 'eth0' > ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id > mdio_register: non unique device name 'eth0' > No ethernet found. > ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id > mdio_register: non unique device name 'eth0' >
Full boot log is the following: U-Boot SPL 2020.04-rc4-00100-g74bf17db39 (Apr 06 2020 - 11:00:45 +0300) mmc boot Trying to boot from MMC1 spl_load_image_fat_os: error reading image system.dtb, err - -2 U-Boot 2020.04-rc4-00100-g74bf17db39 (Apr 06 2020 - 11:00:45 +0300) CPU: Zynq 7z010 Silicon: v3.1 Model: Zynq Z-Turn MYIR Board DRAM: ECC disabled 1 GiB MMC: mmc@e0100000: 0 In: serial@e0001000 Out: serial@e0001000 Err: serial@e0001000 Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id Could not get PHY for eth0: addr 0 No ethernet found. Hit any key to stop autoboot: 0
