On Wed, Apr 01, 2020 at 12:49:31PM +0530, Amit Singh Tomar wrote:
> Devices like uart and clk are needed to be enabled before relocation.
> this patch adds u-boot.dtsi file that mark these device as dm-pre-reloc.
>
> Reviewed-by: Andre Przywara <andre.przyw...@arm.com>
> Signed-off-by: Amit Singh Tomar <amittome...@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasi...@linaro.org>
Thanks,
Mani
> ---
> Changes since v8:
> * No changes.
> Changes since v7:
> * No changes.
> Changes since v6:
> * No changes.
> Changes since v5:
> * Added reviwed-by tag.
> Changes since v4:
> * Moved it to 08/11 to 06/11.
> Changes since v3:
> * Replaced dtsi with dts in subject line along with arm:dts:
> to the prefix.
> Changes since v2:
> * Added License.
> Changes since v1:
> * This is newly added file that was *not* present in v1 and
> contains u-boot specific changes.
> ---
> arch/arm/dts/s700-u-boot.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
> create mode 100644 arch/arm/dts/s700-u-boot.dtsi
>
> diff --git a/arch/arm/dts/s700-u-boot.dtsi b/arch/arm/dts/s700-u-boot.dtsi
> new file mode 100644
> index 0000000..a527ccc
> --- /dev/null
> +++ b/arch/arm/dts/s700-u-boot.dtsi
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2020 Amit Singh Tomar <amittome...@gmail.com>
> + */
> +
> +/{
> + soc {
> + u-boot,dm-pre-reloc;
> + };
> +};
> +
> +&uart3 {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&cmu {
> + u-boot,dm-pre-reloc;
> +};
> --
> 2.7.4
>
