In 1 bit mode OSPI can work at upto 50MHz, this provides before write
performance. Therefore increase frequency from 40MHz to 50MHz
Signed-off-by: Vignesh Raghavendra <vigne...@ti.com>
---
arch/arm/dts/k3-am654-base-board.dts | 2 +-
arch/arm/dts/k3-am654-r5-base-board.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/k3-am654-base-board.dts
b/arch/arm/dts/k3-am654-base-board.dts
index 5058b6c88e96..3ebf4af5e47a 100644
--- a/arch/arm/dts/k3-am654-base-board.dts
+++ b/arch/arm/dts/k3-am654-base-board.dts
@@ -191,7 +191,7 @@
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <8>;
- spi-max-frequency = <40000000>;
+ spi-max-frequency = <50000000>;
cdns,tshsl-ns = <60>;
cdns,tsd2d-ns = <60>;
cdns,tchsh-ns = <60>;
diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts
b/arch/arm/dts/k3-am654-r5-base-board.dts
index 257b56a1b032..e6b78643c197 100644
--- a/arch/arm/dts/k3-am654-r5-base-board.dts
+++ b/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -268,7 +268,7 @@
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <8>;
- spi-max-frequency = <40000000>;
+ spi-max-frequency = <50000000>;
cdns,tshsl-ns = <60>;
cdns,tsd2d-ns = <60>;
cdns,tchsh-ns = <60>;
--
2.26.0
