Hi Marek, > From: Marek Vasut <ma...@denx.de> > Sent: jeudi 26 mars 2020 16:57 > > Define FMC2 base address, for use in board files, until there is an actual > FMC2 > bus driver. > > Signed-off-by: Marek Vasut <ma...@denx.de> > Cc: Patrick Delaunay <patrick.delau...@st.com> > Cc: Patrice Chotard <patrice.chot...@st.com> > --- > arch/arm/mach-stm32mp/include/mach/stm32.h | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach- > stm32mp/include/mach/stm32.h > index f0636005e5..62d95d7f88 100644 > --- a/arch/arm/mach-stm32mp/include/mach/stm32.h > +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h > @@ -13,6 +13,7 @@ > #define STM32_RCC_BASE 0x50000000 > #define STM32_PWR_BASE 0x50001000 > #define STM32_DBGMCU_BASE 0x50081000 > +#define STM32_FMC2_BASE 0x58002000
For me, the address should be defined in this file only for the few addresses used before device tree avaibility: I want to avoid to have all the device defined here. But normally it is not the case for FMC2, even if I understand the current need, without FMC2 bus driver.... I will take this patch only it is not possible to get FMC2 address from device tree. > #define STM32_TZC_BASE 0x5C006000 > #define STM32_ETZPC_BASE 0x5C007000 > #define STM32_STGEN_BASE 0x5C008000 > -- > 2.25.1 Regards Patrick
