On Wed, Aug 11, 2010 at 2:15 PM, Heiko Schocher <h...@denx.de> wrote: > This patch series add full relocation and cache support for arm > based boards. I test this for arm1136, arm_cortexa8 and arm926ejs > based boards.
I pulled u-boot-testing/arm-reloc-and-cache-support and had to clobber the old branch cause I forgot that it was a rebased branch, so don't have the old series against which to perform any comparisons, sorry. Tested 046be127bbccfafe8b84c656ed87e1873e8a63d4 of git://git.denx.de/u-boot-testing.git with da850evm_config. The board did not come up. I set a breakpoint in relocate_code and got a register dump as requested in previous email threads. (gdb) hbreak relocate_code Hardware assisted breakpoint 1 at 0xc1080088: file start.S, line 218. (gdb) c Continuing. Breakpoint 1, relocate_code () at start.S:219 219 mov r5, r1 /* save addr of gd */ (gdb) info registers r0 0xbfebdfa8 3219906472 r1 0xbfebdfac 3219906476 r2 0xbffd2000 3221037056 r3 0x3c 60 r4 0xbfebdfa8 3219906472 r5 0x0 0 r6 0xbfebdfa8 3219906472 r7 0xbfebdfac 3219906476 r8 0xc0000f80 3221229440 r9 0x0 0 r10 0xc1097014 3238621204 r11 0xe8e5134 244207924 r12 0xbfebdfe8 3219906536 sp 0xc0000f80 0xc0000f80 lr 0xc108076c 3238528876 pc 0xc1080088 0xc1080088 <relocate_code+4> fps 0x0 0 cpsr 0x600000d3 1610612947 .. step to start.S:302 where we have 'move lr,r2' (gdb) info registers r0 0xbfebdfac 3219906476 r1 0xbffd2000 3221037056 r2 0xbffd2540 3221038400 r3 0xc1080000 3238526976 r4 0xbffd2000 3221037056 r5 0xbfebdfac 3219906476 r6 0xbffe9610 3221132816 r7 0xbffd2000 3221037056 r8 0xc06ffff0 3228565488 r9 0x0 0 r10 0xffbffef7 4290772727 r11 0xe8e5134 244207924 r12 0xbfebdfe8 3219906536 sp 0xbfebdfa8 0xbfebdfa8 lr 0xc108013c 3238527292 pc 0xc1080154 0xc1080154 <clbss_l+48> fps 0x0 0 cpsr 0x600000d3 1610612947 Best Regards, Ben Gardiner --- Nanometrics Inc. http://www.nanometrics.ca _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
