On 3/22/20 7:45 PM, Marek Vasut wrote: > The RX descriptor field 3 should contain only OWN and BUF1V bits before > being used for receiving data by the DMA engine. However, right now, if > the descriptor was already used for receiving data and is being cleared, > the field 3 is only modified and the aforementioned two bits are ORRed > into the field. This could lead to a residual dirty bits being left in > the field 3 from previous transfer, and it generally does. Fully set the > field 3 instead to clear those residual dirty bits.
The series, Tested-by: Stephen Warren <swar...@nvidia.com> (On Jetson, using test/py tests)
