Hi Marek, > On 3/22/20 2:00 PM, Lukasz Majewski wrote: > [...] > > diff --git a/common/usb_storage.c b/common/usb_storage.c > > index 92e1e54d1c..3c2324fa1a 100644 > > --- a/common/usb_storage.c > > +++ b/common/usb_storage.c > > @@ -729,6 +729,7 @@ static int usb_stor_BBB_transport(struct > > scsi_cmd *srb, struct us_data *us) pipeout = > > usb_sndbulkpipe(us->pusb_dev, us->ep_out); /* DATA phase + error > > handling */ data_actlen = 0; > > + mdelay(10); /* Like linux does. */ > > Does this add delay to every single transfer ?
It brings the slowdown, yes.
However, without it I very often see the error that the USB address
couldn't be assigned.
> That would mean a massive slowdown if you use short data transfers,
> which is needed for old/limited USB sticks.
>
> > /* no data, go immediately to the STATUS phase */
> > if (srb->datalen == 0)
> > goto st;
> > @@ -1023,9 +1024,32 @@ static int usb_request_sense(struct scsi_cmd
> > *srb, struct us_data *ss) return 0;
> > }
> >
> > +/*
> > + * This spins up the disk and also consumes the time that the
> > + * disk takes to become active and ready to read data.
> > + * Some drives (like Western Digital) can take more than 5 seconds.
> > + * The delay occurs on the 1st data read from the disk.
> > + * Extending the timeout here works better than handling the
> > timeout
> > + * as an error on a "real" read.
> > + */
> > +static int usb_spinup(struct scsi_cmd *srb, struct us_data *ss)
> > +{
> > + memset(&srb->cmd[0], 0, 12);
> > + srb->cmd[0] = SCSI_START_STP;
> > + srb->cmd[1] = srb->lun << 5;
> > + srb->cmd[4] = 1; /* Start spinup. */
> > + srb->datalen = 0;
> > + srb->cmdlen = 6;
> > + ss->pusb_dev->extra_timeout = 9876;
>
> What is this magic number ?
This number is added to the timeout up to which ehci controller waits
for EHCI TD to be sent.
Why there is 9876 - I do guess that it was took from Linux in some
point in time.
>
> > + ss->transport(srb, ss);
> > + ss->pusb_dev->extra_timeout = 0;
> > + return 0;
> > +}
>
> [...]
>
> > diff --git a/include/usb.h b/include/usb.h
> > index efb67ea33f..5b0f5ce5d6 100644
> > --- a/include/usb.h
> > +++ b/include/usb.h
> > @@ -140,6 +140,7 @@ struct usb_device {
> > int act_len; /* transferred bytes */
> > int maxchild; /* Number of ports if
> > hub */ int portnr; /* Port number, 1=first */
> > + int extra_timeout; /* Add to timeout in ehci_submit_async
> > or spinup */
>
> Does this work with xhci too ?
Yes, it is used in patch 5/5.
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lu...@denx.de
pgpvEEPuba95w.pgp
Description: OpenPGP digital signature
