On Wed, Aug 11, 2010 at 9:31 AM, Ben Gardiner <bengardi...@nanometrics.ca> wrote: > On Wed, Aug 11, 2010 at 1:56 AM, Heiko Schocher <h...@denx.de> wrote: >> Can you try >> >> http://git.denx.de/?p=u-boot/u-boot-testing.git;a=shortlog;h=refs/heads/arm-reloc-and-cache-support
This is the commit from which I was working -- there have been no additional updates (git reports 'already up-to-date'). >> + remove in include/configs/da850evm.h >> line 42: #define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, >> init done */ >> >> ? >> >> If it don;t work, can you make a breakpoint in >> arch/arm/cpu/arm926ejs/start.S relocate_code and provide a register >> dump? And can you find out whats stored in gd->ram_size? > > Most definitely. I'll get back to you shortly. With: diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index e14817b..a7b8021 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -39,7 +39,6 @@ #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) #define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ /* * Memory Info It works! Thank you, Heiko. So the code was working fine all along -- I just needed to configure it correctly. Sorry for all the noise and thank you again for your patches and the help in using them. Best Regards, Ben Gardiner --- Nanometrics Inc. http://www.nanometrics.ca _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
