On Wed, Mar 11, 2020 at 3:04 PM Pragnesh Patel <pragnesh.pa...@sifive.com> wrote: > > With sifive_fu540_defconfig:
Please use "U-Boot" in the commit title > > User can use FSBL or u-boot-spl.bin anyone at a time. > > For FSBL, > fsbl->fw_payload.bin(opensbi+u-boot) > > For u-boot-spl.bin, > u-boot-spl.bin->FIT image(opensbi+u-boot+dtb) > > U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with > u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT > image u-boot.itb from 1st partition of SD card (replace fw_payload.bin > with u-boot.itb) into RAM. > > U-boot SPL expects u-boot.itb FIT image in the 1st partition of SD U-Boot > card irrespective of GUID > > Signed-off-by: Pragnesh Patel <pragnesh.pa...@sifive.com> > --- > configs/sifive_fu540_defconfig | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/configs/sifive_fu540_defconfig b/configs/sifive_fu540_defconfig > index 6d61e6c960..1b33c81be4 100644 > --- a/configs/sifive_fu540_defconfig > +++ b/configs/sifive_fu540_defconfig > @@ -12,3 +12,14 @@ CONFIG_DISPLAY_BOARDINFO=y > CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" > CONFIG_SYS_RELOC_GD_ENV_ADDR=y > CONFIG_DM_MTD=y > +CONFIG_SPL_SEPARATE_BSS=y > +CONFIG_SPL=y > +CONFIG_SPL_MMC_SUPPORT=y > +CONFIG_SPL_SPI_SUPPORT=y > +CONFIG_SPL_YMODEM_SUPPORT=y > +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y > +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=1 > +CONFIG_SPL_CLK=y > +CONFIG_SPL_PAYLOAD="u-boot.itb" > +CONFIG_SYS_MALLOC_F_LEN=0x3000 > +CONFIG_SIFIVE_FU540_DDR=y > -- Please make sure this is exactly the same as: $ make sifive_fu540_defconfig $ make savedefconfig Compare the generated defconfig with sifive_fu540_defconfig Regards, Bin
