From: Bryan Wu <bryan...@analog.com>
Signed-off-by: Bryan Wu <bryan...@analog.com>
Signed-off-by: Cliff Cai <cliff....@analog.com>
Signed-off-by: Mike Frysinger <vap...@gentoo.org>
---
v2
- use writeb instead of writew as pointed out by Sergei Shtylyov
drivers/usb/musb/musb_hcd.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index dd2aa7f..8a761df 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -917,6 +917,13 @@ int submit_control_msg(struct usb_device *dev, unsigned
long pipe, void *buffer,
dev->status = 0;
dev->act_len = len;
+
+#ifdef MUSB_NO_MULTIPOINT
+ /* Set device address to USB_FADDR register */
+ if (setup->request == USB_REQ_SET_ADDRESS)
+ writeb(dev->devnum, &musbr->faddr);
+#endif
+
return len;
}
--
1.7.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
