On Mon, Aug 9, 2010 at 3:14 PM, Sergei Shtylyov wrote: > Mike Frysinger wrote: >> --- a/drivers/usb/musb/musb_hcd.c >> +++ b/drivers/usb/musb/musb_hcd.c >> @@ -917,6 +917,13 @@ int submit_control_msg(struct usb_device *dev, >> unsigned long pipe, void *buffer, >> dev->status = 0; >> dev->act_len = len; >> + >> +#ifdef MUSB_NO_MULTIPOINT >> + /* Set device address to USB_FADDR register */ >> + if (setup->request == USB_REQ_SET_ADDRESS) >> + writew(dev->devnum, &musbr->faddr); > > FAddr is a 8-bit regisrer, isn't it?
on Blackfin systems, it is 16bit ... i'll have to double check to see what the hardware does with an 8bit access. i see there are other places in the code where 8bit is already being done, so those might need to be addressed as well ... -mike _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
