Add, if missing, the bitfield masks in the setting macros of the LCD
controller registers.

Signed-off-by: Dario Binacchi <dario...@libero.it>
---

 drivers/video/am335x-fb.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/video/am335x-fb.c b/drivers/video/am335x-fb.c
index 18e3bd1f35..ed445546ec 100644
--- a/drivers/video/am335x-fb.c
+++ b/drivers/video/am335x-fb.c
@@ -26,14 +26,14 @@
 #define LCDC_FMAX                              200000000
 
 /* LCD Control Register */
-#define LCD_CLK_DIVISOR(x)                     ((x) << 8)
+#define LCD_CLK_DIVISOR(x)                     (((x) & 0xFF) << 8)
 #define LCD_RASTER_MODE                                BIT(0)
 /* LCD Clock Enable Register */
 #define LCD_CORECLKEN                          BIT(0)
 #define LCD_LIDDCLKEN                          BIT(1)
 #define LCD_DMACLKEN                           BIT(2)
 /* LCD DMA Control Register */
-#define LCD_DMA_BURST_SIZE(x)                  ((x) << 4)
+#define LCD_DMA_BURST_SIZE(x)                  (((x) & 0x07) << 4)
 #define LCD_DMA_BURST_1                                0x0
 #define LCD_DMA_BURST_2                                0x1
 #define LCD_DMA_BURST_4                                0x2
@@ -46,9 +46,9 @@
 #define LCD_HORLSB(x)                          (((((x) >> 4)-1) & 0x3F) << 4)
 #define LCD_HORMSB(x)                          (((((x) >> 4)-1) & 0x40) >> 4)
 /* LCD Timing_1 Register */
-#define LCD_VBP(x)                             ((x) << 24)
-#define LCD_VFP(x)                             ((x) << 16)
-#define LCD_VSW(x)                             (((x)-1) << 10)
+#define LCD_VBP(x)                             (((x) & 0xFF) << 24)
+#define LCD_VFP(x)                             (((x) & 0xFF) << 16)
+#define LCD_VSW(x)                             ((((x) - 1) & 0x3F) << 10)
 #define LCD_VERLSB(x)                          (((x)-1) & 0x3FF)
 /* LCD Timing_2 Register */
 #define LCD_HSWMSB(x)                          ((((x)-1) & 0x3C0) << 21)
-- 
2.24.0

Reply via email to