Thanks again for the help, it works now. Next question:
'make uImage' in the linux kernel tree builds a linux kernel image that u-boot can use. How can I change the compression that is used? Actually, I'm not even sure whether my kernel is compressed or not. Here is the laat part of the output from 'make uImage'; it tells me the kernel is not compressed: > UIMAGE arch/arm/boot/uImage > Image Name: Linux-2.6.31 > Created: Thu Aug 5 23:59:59 2010 > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 1517292 Bytes = 1481.73 kB = 1.45 MB > Load Address: 0x80008000 > Entry Point: 0x80008000 > Image arch/arm/boot/uImage is ready > thel...@tubu8:~/devel/controller/starterkit/linux$ however the embedded system tells me it is uncompressing: > => bootm 0x80108000 > ## Booting kernel from Legacy Image at 80108000 ... > Image Name: Linux-2.6.31 > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 1517292 Bytes = 1.4 MiB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > Loading Kernel Image ... OK > OK > > Starting kernel ... > > Uncompressing > Linux.................................................................................................... > done, booting the kernel. -- Thanks, Thomas _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
