On Fri, Jan 24, 2020 at 11:21 AM Pragnesh Patel <pragnesh.pa...@sifive.com> wrote: > > With sifive_fu540_spl_defconfig: > > U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with > u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT > image u-boot.itb from 1st partition of SD card (replace fw_payload.bin > with u-boot.itb) into RAM. > > U-boot SPL expects u-boot.itb FIT image in the 1st partition of SD > card irrespective of GUID > > Signed-off-by: Pragnesh Patel <pragnesh.pa...@sifive.com> > ---
I'm thinking we don't need any separate config for SPL. Say if we have single config that creates both SPL and U-Boot proper and give feasibility to the user to use 1) SPL + U-Boot proper 2) SiFive SPL + U-Boot proper We are using a similar approach for other platforms, I guess the same will valid here, any comments?
