I've found an issue in testing with the ENV_IS_IN_X values, they need to
be changed from a "select" to an "imply" to enable disabling default
values and support booting from MMC and having flash in SPI (or the
other way around).
I have the change queued for either a second patch submission (pending
additional review and comments), or subsequent patch.
Joel
On 2020-01-11 12:36, Joel Johnson wrote:
With the move to driver model usage, ensure that the required driver
support for SPI and MMC booting is available in SPL.
Tested on SolidRun ClearFog devices.
Signed-off-by: Joel Johnson <mrj...@lixil.net>
---
arch/arm/mach-mvebu/Kconfig | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index c6a1a0a944..b3239b2b01 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -234,9 +234,19 @@ choice
config MVEBU_SPL_BOOT_DEVICE_SPI
bool "SPI NOR flash"
+ select ENV_IS_IN_SPI_FLASH
+ select SPL_DM_SPI
+ select SPL_MTD_SUPPORT
+ select SPL_SPI_FLASH_SUPPORT
+ select SPL_SPI_LOAD
+ select SPL_SPI_SUPPORT
config MVEBU_SPL_BOOT_DEVICE_MMC
bool "SDIO/MMC card"
+ select ENV_IS_IN_MMC
+ # GPIO required for SD card presence detection line
+ select SPL_DM_GPIO
+ select SPL_DM_MMC
select SPL_LIBDISK_SUPPORT
config MVEBU_SPL_BOOT_DEVICE_SATA
