The mPCIe slots on ClearFog Pro and ClearFog Base may be alternately
configured for SATA usage.

Signed-off-by: Joel Johnson <mrj...@lixil.net>
---

 board/solidrun/clearfog/Kconfig    | 17 +++++++++++++++++
 board/solidrun/clearfog/clearfog.c |  6 ++++++
 2 files changed, 23 insertions(+)

diff --git a/board/solidrun/clearfog/Kconfig b/board/solidrun/clearfog/Kconfig
index d122be9196..30f53508c2 100644
--- a/board/solidrun/clearfog/Kconfig
+++ b/board/solidrun/clearfog/Kconfig
@@ -7,4 +7,21 @@ config TARGET_CLEARFOG_BASE
         Configure for the ClearFog Base board variant. By default the ClearFog
         Pro variant will be configured.
 
+config CLEARFOG_CON3_SATA
+       bool "Use CON3 slot in SATA mode"
+       help
+        Use the CON3 port with SATA protocol instead of the default PCIe.
+        The ClearFog port allows usage of either mSATA or miniPCIe
+        modules, but the desired protocol must be configured at build
+        time since it affects the SerDes topology layout.
+
+config CLEARFOG_CON2_SATA
+       bool "Use CON2 slot in SATA mode"
+       depends on !TARGET_CLEARFOG_BASE
+       help
+        Use the CON2 port with SATA protocol instead of the default PCIe.
+        The ClearFog port allows usage of either mSATA or miniPCIe
+        modules, but the desired protocol must be configured at build
+        time since it affects the SerDes topology layout.
+
 endmenu
diff --git a/board/solidrun/clearfog/clearfog.c 
b/board/solidrun/clearfog/clearfog.c
index 44aac907fd..4f51b19ce9 100644
--- a/board/solidrun/clearfog/clearfog.c
+++ b/board/solidrun/clearfog/clearfog.c
@@ -31,10 +31,16 @@ DECLARE_GLOBAL_DATA_PTR;
 static struct serdes_map board_serdes_map[] = {
        {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
        {SGMII1, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+#if defined (CONFIG_CLEARFOG_CON3_SATA)
+       {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+#else
        {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+#endif
        {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
 #if defined (CONFIG_TARGET_CLEARFOG_BASE)
        {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+#elif defined(CONFIG_CLEARFOG_CON2_SATA)
+       {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
 #else
        {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
 #endif
-- 
2.20.1

Reply via email to