None of the AMCC boards uses an embedded environment, so there is no
need to run "saveenv" after updating U-Boot.  Drop the redundant
commands from the default environment.

Signed-off-by: Wolfgang Denk <w...@denx.de>
---
 include/configs/amcc-common.h |    6 ++----
 1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index 13a941e..23a859f 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -278,15 +278,13 @@
        "load=tftp 200000 ${u-boot}\0"                                  \
        "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"        
\
                "era " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"               
\
-               "cp.b ${fileaddr} " xstr(CONFIG_SYS_MONITOR_BASE) " 
${filesize};" \
-               "setenv filesize;saveenv\0"                             \
+               "cp.b ${fileaddr} " xstr(CONFIG_SYS_MONITOR_BASE) " 
${filesize}" \
        "upd=run load update\0"                                         \
 
 #define CONFIG_AMCC_DEF_ENV_NAND_UPD                                   \
        "u-boot-nand=" xstr(CONFIG_HOSTNAME) "/u-boot-nand.bin\0"       \
        "nload=tftp 200000 ${u-boot-nand}\0"                            \
-       "nupdate=nand erase 0 100000;nand write 200000 0 100000;"       \
-               "setenv filesize;saveenv\0"                             \
+       "nupdate=nand erase 0 100000;nand write 200000 0 100000"        \
        "nupd=run nload nupdate\0"
 
 #endif /* __AMCC_COMMON_H */
-- 
1.7.1.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to