> Currently the following hang is observed when booting a imx6sx-sdb > board: > U-Boot 2020.01-rc5-00004-g643366bcd5 (Dec 19 2019 - 14:56:23 -0300) > CPU: Freescale i.MX6SX rev1.0 996 MHz (running at 792 MHz) > CPU: Extended Commercial temperature grade (-20C to 105C) at 32C > Reset cause: POR > Model: Freescale i.MX6 SoloX SDB RevB Board > Board: MX6SX SABRE SDB revA > DRAM: 1 GiB > initcall sequence bffd8514 failed at call 87804cc0 (err=-19) > ### ERROR ### Please RESET the board ### > When pmic_get() is used with DM the first parameter must be > the complete node name plus the unit address. > Fix the pmic_get() parameter to fix the boot regression. > Tested on a imx6sx-sdb and imx6q-sabresd boards. > Signed-off-by: Fabio Estevam <feste...@gmail.com> > Reviewed-by: Igor Opaniuk <igor.opan...@toradex.com> Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de =====================================================================
