On 11/22/19 2:34 AM, Tan, Ley Foon wrote: > > >> -----Original Message----- >> From: Ooi, Joyce <joyce....@intel.com> >> Sent: Thursday, November 21, 2019 10:49 PM >> To: Tan, Ley Foon <ley.foon....@intel.com>; Ang, Chee Hong >> <chee.hong....@intel.com> >> Cc: Ooi, Joyce <joyce....@intel.com>; u-boot@lists.denx.de >> Subject: [PATCH] arm: dts: Stratix10: change pad skew values for EMAC0 PHY >> driver >> >> The HPS EMAC0 drive strength is changed to 4mA because the initial 8mA >> drive strength has caused CE test to fail. This requires changes on the pad >> skew for EMAC0 PHY driver. Based on several measurements done, Tx clock >> does not require the extra 0.96ns delay which was needed in Arria10. >> >> Signed-off-by: Ooi, Joyce <joyce....@intel.com> > Reviewed-by: Ley Foon Tan <ley.foon....@intel.com>
Applied, thanks. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
