> -----Original Message----- > From: Ooi, Joyce <joyce....@intel.com> > Sent: Thursday, November 21, 2019 10:49 PM > To: Tan, Ley Foon <ley.foon....@intel.com>; Ang, Chee Hong > <chee.hong....@intel.com> > Cc: Ooi, Joyce <joyce....@intel.com>; u-boot@lists.denx.de > Subject: [PATCH] arm: dts: Stratix10: change pad skew values for EMAC0 PHY > driver > > The HPS EMAC0 drive strength is changed to 4mA because the initial 8mA > drive strength has caused CE test to fail. This requires changes on the pad > skew for EMAC0 PHY driver. Based on several measurements done, Tx clock > does not require the extra 0.96ns delay which was needed in Arria10. > > Signed-off-by: Ooi, Joyce <joyce....@intel.com> Reviewed-by: Ley Foon Tan <ley.foon....@intel.com>
Regards Ley Foon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
