Enable 4-byte Fast Read command for Flexspi AHB mode

Signed-off-by: Kuldeep Singh <kuldeep.si...@nxp.com>
---
v5: New patch

 configs/lx2160aqds_tfa_SECURE_BOOT_defconfig | 1 +
 configs/lx2160aqds_tfa_defconfig             | 1 +
 configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 1 +
 configs/lx2160ardb_tfa_defconfig             | 1 +
 4 files changed, 4 insertions(+)

diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig 
b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
index 5c6a0b5..4167b14 100644
--- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
@@ -4,6 +4,7 @@ CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_NXP_ESBC=y
+CONFIG_FSPI_AHB_EN_4BYTE=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
diff --git a/configs/lx2160aqds_tfa_defconfig b/configs/lx2160aqds_tfa_defconfig
index f50bc02..843c93c 100644
--- a/configs/lx2160aqds_tfa_defconfig
+++ b/configs/lx2160aqds_tfa_defconfig
@@ -3,6 +3,7 @@ CONFIG_TARGET_LX2160AQDS=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
+CONFIG_FSPI_AHB_EN_4BYTE=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig 
b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
index 2e2d888..21221d4 100644
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_NXP_ESBC=y
 CONFIG_EMC2305=y
+CONFIG_FSPI_AHB_EN_4BYTE=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig
index 632b52e..5448472 100644
--- a/configs/lx2160ardb_tfa_defconfig
+++ b/configs/lx2160ardb_tfa_defconfig
@@ -4,6 +4,7 @@ CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_EMC2305=y
+CONFIG_FSPI_AHB_EN_4BYTE=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
-- 
2.7.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to