The default value of CONFIG_SYS_MALLOC_F_LEN (0x400)
leaves U-Boot with not enough memory to do this,
causing it to hang.
Fix this problem by providing a convenient default value
for CONFIG_SYS_MALLOC_F_LEN.
Relative SoC:
- LS1012A
- LS1021A
- LS1043A
- LS1046A
Signed-off-by: Biwen Li <biwen...@nxp.com>
---
Kconfig | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Kconfig b/Kconfig
index cda4f58ff7..1aae7a680b 100644
--- a/Kconfig
+++ b/Kconfig
@@ -146,7 +146,9 @@ config SYS_MALLOC_F_LEN
default 0x1000 if AM33XX
default 0x2800 if SANDBOX
default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \
- ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5)
+ ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \
+ ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \
+ ARCH_LS1046A)
default 0x400
help
Before relocation, memory is very limited on many platforms. Still,
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
