On 21/10/19 2:55 PM, Keerthy wrote:
> From: Tero Kristo <t-kri...@ti.com>
>
> Add VTM node for voltage and thermal management. For u-boot, this is needed
> for supporting AVS class 0, as the efuse values for the OPPs are stored
> under the VTM.
>
> Signed-off-by: Tero Kristo <t-kri...@ti.com>
> Signed-off-by: Keerthy <j-keer...@ti.com>
> ---
> arch/arm/dts/k3-am65-wakeup.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/dts/k3-am65-wakeup.dtsi
> b/arch/arm/dts/k3-am65-wakeup.dtsi
> index 2676d6035b..5d050c6fd8 100644
> --- a/arch/arm/dts/k3-am65-wakeup.dtsi
> +++ b/arch/arm/dts/k3-am65-wakeup.dtsi
> @@ -62,4 +62,11 @@
> clocks = <&k3_clks 115 1>;
> power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
> };
> +
> + wkup_vtm0: wkup_vtm@42050000 {
> + compatible = "ti,am654-vtm", "ti,am654-avs";
> + reg = <0x42050000 0x25c>;
> + power-domains = <&k3_pds 80>;
> + #thermal-sensor-cells = <1>;
> + };
Is this going to be used in kernel? If not can you move this to r5-base board?
Thanks and regards,
Lokesh
> };
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
