At present we call spl_init() before identifying the CPU. This is not a
good idea - e.g. if bootstage is enabled then it will try to set up the
timer which works better if the CPU is identified.
Put explicit code at each entry pointer to identify the CPU.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v3: None
Changes in v2: None
arch/x86/cpu/start_from_spl.S | 1 +
arch/x86/lib/spl.c | 4 ++++
arch/x86/lib/tpl.c | 5 +++++
3 files changed, 10 insertions(+)
diff --git a/arch/x86/cpu/start_from_spl.S b/arch/x86/cpu/start_from_spl.S
index a73b4d7c459..22cab2dd6ce 100644
--- a/arch/x86/cpu/start_from_spl.S
+++ b/arch/x86/cpu/start_from_spl.S
@@ -31,6 +31,7 @@ _start:
call board_init_f_init_reserve
+ call x86_cpu_reinit_f
xorl %eax, %eax
call board_init_f
call board_init_f_r
diff --git a/arch/x86/lib/spl.c b/arch/x86/lib/spl.c
index a8eaafeb5b5..1677f80b25c 100644
--- a/arch/x86/lib/spl.c
+++ b/arch/x86/lib/spl.c
@@ -67,6 +67,10 @@ static int x86_spl_init(void)
int ret;
debug("%s starting\n", __func__);
+ if (IS_ENABLED(TPL))
+ ret = x86_cpu_reinit_f();
+ else
+ ret = x86_cpu_init_f();
ret = spl_init();
if (ret) {
debug("%s: spl_init() failed\n", __func__);
diff --git a/arch/x86/lib/tpl.c b/arch/x86/lib/tpl.c
index 6ca3f7b1f20..363984f7f27 100644
--- a/arch/x86/lib/tpl.c
+++ b/arch/x86/lib/tpl.c
@@ -24,6 +24,11 @@ static int x86_tpl_init(void)
int ret;
debug("%s starting\n", __func__);
+ ret = x86_cpu_init_tpl();
+ if (ret) {
+ debug("%s: x86_cpu_init_tpl() failed\n", __func__);
+ return ret;
+ }
ret = spl_init();
if (ret) {
debug("%s: spl_init() failed\n", __func__);
--
2.23.0.866.gb869b98d4c-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
